3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

first time drag strip runs...

Old Apr 7, 2003 | 06:50 AM
  #1  
ttpowerd's Avatar
Thread Starter
HARRRRRRRRR
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 1,858
Likes: 0
From: Marietta GA
Cool first time drag strip runs...

I went to the drag strip for the first time this weekend. It was sprinkling a little so the track got a little wet and traction was rough Anywho, this is what I ran:

RT - .862 seconds
60' - 2.265 seconds
1/8 - 8.734 seconds
1/8 - 89.09 mph

Mods are in sig. Is this a pretty good time? Any way to convert that to 1/4 mile times?
Reply
Old Apr 7, 2003 | 07:47 AM
  #2  
GsrSol's Avatar
Z06 powered FD
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 1,883
Likes: 0
From: Dallas, Texas
That's not bad for your first time but that car should be alot faster. Stock LS1's usually run 8.7 - 8.9

There are 1/8 to 1/4 calculators on the web you just have to search.

With dp, mp, cb, and Pettit ecu I did 8.2 @ 9Xmph.
Reply
Old Apr 7, 2003 | 09:28 AM
  #3  
ttpowerd's Avatar
Thread Starter
HARRRRRRRRR
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 1,858
Likes: 0
From: Marietta GA
I was having bad problems with wheel hop and tire spin. The back end slid around to the right on me when I switched to second gear.

What rpm do you launch at? I tried around 3.5k and let the clutch out semi-fast but all I got was wheel hop. Maybe lower??? higher? I am running with nitto drag radials.
Reply
Old Apr 7, 2003 | 10:31 AM
  #4  
NukeGenius's Avatar
Dim Sum owns you!
Tenured Member 10 Years
 
Joined: Feb 2003
Posts: 2,733
Likes: 0
From: Charleston, SC
Wow, you must have been getting off the line real slow. My first, and only time, I was running similar 60ft times, but with slower reaction times. My 1/8 ets were not as good as yours either, but mine has fewer mods, and some **** poor driving to boot.
Reply
Old Apr 7, 2003 | 10:41 AM
  #5  
GsrSol's Avatar
Z06 powered FD
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 1,883
Likes: 0
From: Dallas, Texas
Yea I was having the same issues on some crappy tires. Most of my 60's were 2.2 but my best were 2.1. Major wheel hop, felt tlike the car was going to break in half and I got sideways in 2nd a couple times too.

I can't really tell you what to launch at, with my new setup I launch at 4k on normal street tires.

Don't worry about reaction times for now, learn how to launch the car and get used to it first.

Last edited by GsrSol; Apr 7, 2003 at 10:46 AM.
Reply
Old Apr 7, 2003 | 01:36 PM
  #6  
crazysuprakid's Avatar
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Nov 2002
Posts: 888
Likes: 0
From: Grapevine,TX
My first time out in my car I ran an 8.9 with only a high flo cat and DP on cheap *** tires. 2.1 60'ft times all day. The track I was at seemed to be prepped extremely well though.

I would launch at 3K and pretty much just sidestep the clutch. They would spin for a second but hook, then into second I would get a chirp but I don't have near as much power as you should. Any higher launch and I got wheelhop like you said that felt like the car was being ripped apart.

You should definetly be able to improve those times. Especially with that MPH.
Reply
Old Apr 7, 2003 | 01:48 PM
  #7  
Marshall's Avatar
Rotary Enthusiast
Tenured Member 15 Years
 
Joined: Mar 2001
Posts: 1,023
Likes: 0
From: Edwards, CA
89 will get you 114 in the 1/4. Not bad at all.
Reply
Old Apr 7, 2003 | 05:48 PM
  #8  
streetdreamzny's Avatar
Senior Member
Tenured Member 20 Years
iTrader: (6)
 
Joined: Aug 2001
Posts: 531
Likes: 0
From: P.C., NY
89 in the 1/8 will be around a mid 12 sec run, yesterday i ran 12.5@114 in the 1/4 and 8.1@87 in the 1/8
Reply
Old Apr 7, 2003 | 06:51 PM
  #9  
Dragueur's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 483
Likes: 0
From: Sacramento
nice times....

let me see what i got...

9.2 when i was stock with a boost leak.
should be better now.


good run!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
distr0
Megasquirt Forum
48
Mar 18, 2022 06:17 PM
Claudio RX-7
Haltech Forum
5
Apr 23, 2019 02:50 PM
turbo-minivan
General Rotary Tech Support
69
Feb 4, 2016 12:29 AM
Frisky Arab
2nd Generation Specific (1986-1992)
13
Aug 18, 2015 05:30 PM
WLD.RX7
Introduce yourself
1
Aug 16, 2015 09:43 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:20 AM.