Fubawu

Pics are poor but you get the idea. Car has 16k on it
John

http://ca.pg.photos.yahoo.com/ph/che...2XWDFBixcX_FtB

DarrinC

That thing is clean.

RuffRyder

iTrader: (1)

original 16k? Why didn't you just leave it stock since it is 16k and very clean. Nice car though

Fubawu

^^^I have all the stock parts, all mods are just bolt ons.
John

93rx74lyfe

iTrader: (1)

that looks great! take care of her!

recon fd

What type of IC is that? Looks to be the stock one, but with metal end caps or something? Might be a stupid question, but I am always wanting to learn something about cars/parts/etc.

thanks,
-josh

Fubawu

It is a ARC unit. A little thicker than stock.
John

level7

iTrader: (3)

Thats a clean machine Fub, love the wheel and car color combo. Plan on updating the front with a 99 spec front lip or keeping it stock? Nice job

KMAR

Nice to see that the hole in the duct that feeds the stock air box is covered up. A lot of people don't do this. Nice car.

hus

Nice for sure. Do you plan on doing any suspensions mods? Looks to be a tad high with those wheels and tires. I recommend the Koni Yellow Adjustables with Eibach springs if you plan on doing a suspension setup. As always, gotta love the VRs.

Fubawu

I will be going with a coilover setup. Not sure on the spring rates should have it set
in the next month or so.
John

efranklin

looks damnnnn clean a little drop will make it look nicer not too much though.. cant wait to get my 7 such a clean car.

Spooln7

Very nice looking 7, now just lower it a tad bit and it will be complete.

Fubawu

Mods so far:
-AST elimination
-HKS downpipe
-HKS mid pipe
-Racing Beat cat back
-Greddy intake kit
-Walbro 255lph hp fuel pump
-NGK Spark plugs
-Magnacor 10mm plug wires
-Diff and tranny fluids changed to Redline MT-90
-Rad flush & fill
-ARC SMIC with piping
-Koyo Rad soon to come!
-OMP steering wheel
-Greddy Boost and Oil Temp gauge
-Vacuum line replaced
-Slave brake cylinder rebuild
-Stainless steel Clutch lines
-Apexi Power FC (Tuned to 13PSI) 290whp Soon to detuned to 11 PSI
-Volk CE28N'S 17X8.5 w/Advan AO32'S

Mods on the way:
Water temp gauge (Greddy)
Tanabe strut bar
Rotora axiss brake pads
Power slot rotors (slotted)
Coilovers and seats are down the road a few months!! Running out
of money fast. Need to save some cash for the track days