A Few Questions: Horn Doesn't Work, Window Switch, Vibrations, Estimated HP
#1
Rotary Enthusiast
Thread Starter
Join Date: Aug 2002
Location: RX7 Heaven
Posts: 1,090
Likes: 0
Received 0 Likes
on
0 Posts
A Few Questions: Horn Doesn't Work, Window Switch, Vibrations, Estimated HP
Although these are four completely different topics, I didn't really want to start three different topics:
1) My horn doesn't work. There are a few spots on the button where it sometimes work, but others do not... I searched but I don't know.
2) My window goes up or down but not always consistant. Sometimes you really need to push it... So I've read that the switch is bad. How would you disconnect the switch and check the strength of the ground?
3) There are some vibrations above the gauge cluster. Should I take the dash off and see what is rattling and then tighten it or something? How would you take off the dash?
4) I hate these questions too, but what HP would you be at w/ just hoses and downpipe... I'm thinking something between 260-270...
Thanks a lot!
1) My horn doesn't work. There are a few spots on the button where it sometimes work, but others do not... I searched but I don't know.
2) My window goes up or down but not always consistant. Sometimes you really need to push it... So I've read that the switch is bad. How would you disconnect the switch and check the strength of the ground?
3) There are some vibrations above the gauge cluster. Should I take the dash off and see what is rattling and then tighten it or something? How would you take off the dash?
4) I hate these questions too, but what HP would you be at w/ just hoses and downpipe... I'm thinking something between 260-270...
Thanks a lot!
#3
Rotary Freak
Join Date: Dec 2001
Location: Hattiesburg, MS
Posts: 1,668
Likes: 0
Received 0 Likes
on
0 Posts
Re: A Few Questions: Horn Doesn't Work, Window Switch, Vibrations, Estimated HP
Originally posted by Louis M
Although these are four completely different topics, I didn't really want to start three different topics:
1) My horn doesn't work. There are a few spots on the button where it sometimes work, but others do not... I searched but I don't know.
Although these are four completely different topics, I didn't really want to start three different topics:
1) My horn doesn't work. There are a few spots on the button where it sometimes work, but others do not... I searched but I don't know.
2) My window goes up or down but not always consistant. Sometimes you really need to push it... So I've read that the switch is bad. How would you disconnect the switch and check the strength of the ground?
3) There are some vibrations above the gauge cluster. Should I take the dash off and see what is rattling and then tighten it or something?
How would you take off the dash?
4) I hate these questions too, but what HP would you be at w/ just hoses and downpipe... I'm thinking something between 260-270...
Thread
Thread Starter
Forum
Replies
Last Post