FD wiring harness plugs
09-04-04, 08:29 PM
#1
apex seal BBQ
Thread Starter
Join Date: Sep 2002
Location: AL
Posts: 867
Likes: 0
Received 0 Likes
on
0 Posts
FD wiring harness plugs
Yes, I searched. I found a few haltech-related threads, and such, but...
Anyone know if I can get a hold of some good plugs? I've managed to break two injector plugs, the crank angle sensor plug, and the coolant temp sensor. The rest of the harness is in okay shape, but I'd like to not pay $700 for a new harness. I just spend three hours rewrapping the entire harness to have them break when I was reinstalling it. Suggestions?
My FD is currently #0 on the remaining patience list.
Anyone know if I can get a hold of some good plugs? I've managed to break two injector plugs, the crank angle sensor plug, and the coolant temp sensor. The rest of the harness is in okay shape, but I'd like to not pay $700 for a new harness. I just spend three hours rewrapping the entire harness to have them break when I was reinstalling it. Suggestions?
My FD is currently #0 on the remaining patience list.
09-05-04, 10:45 PM
#2
Shut-Up & Let Me Talk
Join Date: May 2002
Location: Ventura, California
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
If you take the broken connecter to a local electrical shop they just might have a replacement for you. Try http://www.marvac.com/ I used them to set up my harness with a quick disconnect so I could pull the engine with out having to remove the whole top of the motor first. OMG what a difference not to mention a back and knee saver.
