FD Wiper Linkage Restoration
Thread Starter
Forum Vendor
Joined: Mar 2020
Posts: 278
Likes: 208
From: NJ
FD Wiper Linkage Restoration
We discovered that the cause to a majority of the slow, sticky, or non-functioning front wiper arms are not due to bad motors, but rather due to the linkage arm pivots binding/sticking. This in turn makes the wiper motors have to work twice as hard and in most cases slow down, stick, or otherwise stop working because they are not strong enough to overcome the binding.
We've put together a kit which includes all the components necessary to replace the front wiper linkage plastic bushing cups and eliminate any binding in the two pivot assemblies on the FD.
https://jp3motorsports.com/products/...r&_ss=e&_v=1.0
We've put together a kit which includes all the components necessary to replace the front wiper linkage plastic bushing cups and eliminate any binding in the two pivot assemblies on the FD.
https://jp3motorsports.com/products/...r&_ss=e&_v=1.0
Thread
Thread Starter
Forum
Replies
Last Post
bajaman
3rd Generation Specific (1993-2002)
17
Jun 6, 2002 10:12 AM