FD headlight motor availability
#1
Rotary Enthusiast
Thread Starter
FD headlight motor availability
My mechanic was unable to find FD headlight motors anywhere in Canada.
Are the parts still available somewhere?
Are the parts still available somewhere?
#2
Rotary Enthusiast
iTrader: (32)
Hopefully they still are in production, when I needed a new left side I was told it was the last one in worldwide inventory and that was 3 years ago. I’d check with Ray Crowe.
#3
Rotary Enthusiast
Thread Starter
Thanks, I'll give Ray a call.
#4
Rotary Enthusiast
Thread Starter
Ray can't ship to Canada, so I'll have to find a different source.
They seem to be available at Mazdatrix and Atkins Rotary... not sure which is better (particularly re: shipping to Canada).
They seem to be available at Mazdatrix and Atkins Rotary... not sure which is better (particularly re: shipping to Canada).
Last edited by HiWire; 07-23-21 at 01:22 PM.
#7
Rotary Enthusiast
Thread Starter
Thanks for the recommendation.
I'll keep the old motors in case they can be rebuilt or given to another FD owner.
I'll keep the old motors in case they can be rebuilt or given to another FD owner.
Trending Topics
#8
Lives on the Forum
iTrader: (26)
Some of the items Mazdatrix took money for they did not actually have but turned around and ordered from Mazda in Japan. Japan Mazda is having big problems with filling orders due to Covid, etc.
It seems NOS is not a priority atm.
Meanwhile some of the regular ebay suppliers based in Japan get me stuff virtually overnight.
It seems NOS is not a priority atm.
Meanwhile some of the regular ebay suppliers based in Japan get me stuff virtually overnight.
#9
Rotary Enthusiast
Thread Starter
Ray said there was only one left side motor available in Japan. I hope they're still in stock in some places.
#10
Lives on the Forum
iTrader: (26)
Set of headlights (RHD) on ebay last night C$1000. Grab em while you can.
Cars are coming out of storage and people are pushing to get them up to saleable condition.
This is happening worldwide.
Asia suppliers like Malaysia and Thailand have dried up.
Parts costs in Hong Kong are ridiculous.
Try some of the Australia guys, but watch out for fake ads.
Cars are coming out of storage and people are pushing to get them up to saleable condition.
This is happening worldwide.
Asia suppliers like Malaysia and Thailand have dried up.
Parts costs in Hong Kong are ridiculous.
Try some of the Australia guys, but watch out for fake ads.
#11
Lives on the Forum
iTrader: (26)
https://www.ebay.ca/itm/265190232197...AAAOSwxBxgwIpP
Of course RHD shine to the wrong side of the road.
Of course RHD shine to the wrong side of the road.
#13
Rotary Enthusiast
Thread Starter
I think the motors actually work on my FD... it's just that the left side one was flipping up and down (it stopped eventually).
I made a thread on the question last November: https://www.rx7club.com/3rd-gen-gene...-down-1148602/
So it's possible that I can get by without the motor, but my mechanic was trying to source one and couldn't find any.
I made a thread on the question last November: https://www.rx7club.com/3rd-gen-gene...-down-1148602/
So it's possible that I can get by without the motor, but my mechanic was trying to source one and couldn't find any.
#14
Rotary Freak
If the light is going up and down, it's not the motor, but there's any number available on yahoo, usually included with complete headlights.
Did you inspect the harness as suggested last time?
Cpu2 is involved with headlight operation too - it might be going out - but normally both lights will flap up and down.
Did you inspect the harness as suggested last time?
Cpu2 is involved with headlight operation too - it might be going out - but normally both lights will flap up and down.
#15
Rotary Enthusiast
Thread Starter
I'll check it out. The FD was dead for months this year, but now is the time I can work on it.
#17
Rotary Enthusiast
Thread Starter
I'll check it if I get that far. Going to test the lights this weekend (the mechanic determined that it wasn't causing a battery drain).
#19
Rotary Enthusiast
Thread Starter
Thanks!
I'm going to try and get it fixed with only the necessary replacement parts... not sure how bad it's going to be yet.
I'm going to try and get it fixed with only the necessary replacement parts... not sure how bad it's going to be yet.
#21
Lives on the Forum
iTrader: (6)
About two years ago, I bought a new one to replace my passenger side motor. If I recall correctly, and it's been a while, I think I might have had to reconfigure one of the wires? But if so, I don't recall it being anything difficult.
The following users liked this post:
Redbul (08-10-21)
#24
Rotary Enthusiast
Thread Starter
Thanks, guys.
My mechanic wanted me to ask the forum if there have been updated parts for the assembly.
I told him that everyone seems to be using the original OEM parts, aside from kits like the SakeBomb upgrades.
It's likely that the motors are fine... it's whatever is telling the motor to stop that is the problem (it kept going up and down, but closed properly eventually).
My mechanic wanted me to ask the forum if there have been updated parts for the assembly.
I told him that everyone seems to be using the original OEM parts, aside from kits like the SakeBomb upgrades.
It's likely that the motors are fine... it's whatever is telling the motor to stop that is the problem (it kept going up and down, but closed properly eventually).
#25
Rotary Freak
No changes for the motor. The headlight itself changed later, suspect that would be probably down to a different manufacturer or something else trivial, than any upgrade....FD headlights are pretty crap no matter the year.