Exhaust Video / Sound Clips - Post em here
01-05-03, 02:23 AM
#1
Senior Member
Thread Starter
Join Date: Sep 2001
Location: California
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
Exhaust Video / Sound Clips - Post em here
Since deciding on what exhaust to get largely depends on the sound, a few members and I thought it would be a good idea to get a thread going and make it a sticky. So please post your video clips that have sound (or just the sound clips). Make sure to describe your setup, including all the exhaust components, single or TT, and type of port.
Thanks everyone,
Tom
Thanks everyone,
Tom
01-05-03, 02:41 AM
#2
Senior Member
Thread Starter
Join Date: Sep 2001
Location: California
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by SilverOckt and hosted by GotBoostd7
midpipe, Greddy Power Extreme
midpipe, RB dual tip
Borla XR-1, RB dual tip #1
Borla XR-1, RB dual tip #2
Borla XR-1, RB dual tip, rev to 4500 rpms
Oh, btw...I am SOOOOOO glad you did this!! I was thinking about changing to RB dual tip with a Borla XR1!! You just sold me on it!! Sounds EXCELLENT!
Here's my annoying *** setup...ATR catback with dp/mp. Tone is actually okay above 4000 rpm, sounds like a rocket ship taking off. But it is just toooo damn loud!
ATR catback, ATR midpipe [/B]
midpipe, Greddy Power Extreme
midpipe, RB dual tip
Borla XR-1, RB dual tip #1
Borla XR-1, RB dual tip #2
Borla XR-1, RB dual tip, rev to 4500 rpms
Oh, btw...I am SOOOOOO glad you did this!! I was thinking about changing to RB dual tip with a Borla XR1!! You just sold me on it!! Sounds EXCELLENT!
Here's my annoying *** setup...ATR catback with dp/mp. Tone is actually okay above 4000 rpm, sounds like a rocket ship taking off. But it is just toooo damn loud!
ATR catback, ATR midpipe [/B]
01-05-03, 12:55 PM
#3
Originally posted by nocab72
My current setup: GT35/40 w/wastegate dumped back to DP, RX7store midpipe & JIC Bullet Titanium Exhaust.
WOT @ the track, don't laugh at my ET, bow to the MPH...
http://flathat.woodstream.net/Columb...g/12.1@123.WMV (1.7Mb)
Idling just after new pineapple large street ported motor installation (smoke & crap is from new motor, lol)
http://flathat.woodstream.net/Columb...et_Port_IV.WMV (9.5Mb)
My current setup: GT35/40 w/wastegate dumped back to DP, RX7store midpipe & JIC Bullet Titanium Exhaust.
WOT @ the track, don't laugh at my ET, bow to the MPH...
http://flathat.woodstream.net/Columb...g/12.1@123.WMV (1.7Mb)
Idling just after new pineapple large street ported motor installation (smoke & crap is from new motor, lol)
http://flathat.woodstream.net/Columb...et_Port_IV.WMV (9.5Mb)
01-05-03, 07:29 PM
#4
Rotary Enthusiast
Join Date: May 2002
Location: Tallahassee, FL
Posts: 1,205
Likes: 0
Received 0 Likes
on
0 Posts
hrmm someone sticky? maybe remove the 'common sense' sticky (last post in november) and replace it with this one?
Last edited by YayeR; 01-05-03 at 07:32 PM.
01-05-03, 10:25 PM
#6
Full Member
Join Date: Sep 2001
Location: Isla Vista (Santa Barbara), CA
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Idling just after new pineapple large street ported motor installation (smoke & crap is from new motor, lol)
01-06-03, 06:09 PM
#7
Full Member
Join Date: Sep 2001
Location: Isla Vista (Santa Barbara), CA
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
GT-spec anyone?
Does anybody have and sound clips or vids of an FD w/ the A'pex GT-spec catback? I know this is pretty much the highest flowing catback for the FD, and I like its looks even if its a bit ricey. Anyone?????
Trending Topics
01-06-03, 07:13 PM
#8
Rotary Enthusiast
Join Date: May 2002
Location: Tallahassee, FL
Posts: 1,205
Likes: 0
Received 0 Likes
on
0 Posts
I'm interested in the Border_Racing cat-back or preferrably their full exhaust, i'm sure this clip would be rare but any help would be greatly appreciated 
01-06-03, 09:56 PM
#9
03 Cobra Killer
Join Date: Jan 2002
Location: All Over
Posts: 1,423
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Droops83
Damn Nocab, sounds crazy . . . does the car always idle that lumpy or is that just cuz the motor had just been installed before that vid? Nice car man.
Damn Nocab, sounds crazy . . . does the car always idle that lumpy or is that just cuz the motor had just been installed before that vid? Nice car man.
K
01-06-03, 11:02 PM
#11
Weird Cat Man
What is really needed is a standardized clip... Many video camera mics vary in their ability to record certain ranges...
Maybe the next RX-7 meet I go to where there will be a lot of cars I'll take my camera and get a clip of every car and make it all one movie so that the exhausts can be accurately compared.
Brian
Maybe the next RX-7 meet I go to where there will be a lot of cars I'll take my camera and get a clip of every car and make it all one movie so that the exhausts can be accurately compared.
Brian
01-06-03, 11:24 PM
#12
Senior Member
Thread Starter
Join Date: Sep 2001
Location: California
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Wargasm
What is really needed is a standardized clip... Many video camera mics vary in their ability to record certain ranges...
Maybe the next RX-7 meet I go to where there will be a lot of cars I'll take my camera and get a clip of every car and make it all one movie so that the exhausts can be accurately compared.
Brian
What is really needed is a standardized clip... Many video camera mics vary in their ability to record certain ranges...
Maybe the next RX-7 meet I go to where there will be a lot of cars I'll take my camera and get a clip of every car and make it all one movie so that the exhausts can be accurately compared.
Brian
Make sure you take a notepad and pen with you and have each car owner right down his mods/pieces/engine port.-Tom
01-07-03, 08:22 PM
#14
Full Member
Join Date: Jun 2002
Location: Del Rio TX
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
Re: GT-spec anyone?
Originally posted by Droops83
Does anybody have and sound clips or vids of an FD w/ the A'pex GT-spec catback? I know this is pretty much the highest flowing catback for the FD, and I like its looks even if its a bit ricey. Anyone?????
Does anybody have and sound clips or vids of an FD w/ the A'pex GT-spec catback? I know this is pretty much the highest flowing catback for the FD, and I like its looks even if its a bit ricey. Anyone?????
01-09-03, 07:37 PM
#17
Originally posted by forcefed1
great thread! im going to add a borla to my midpipe this weekend. ill record the before and after too. except I donna what exhaust I have on there
great thread! im going to add a borla to my midpipe this weekend. ill record the before and after too. except I donna what exhaust I have on there
Thats great Forcefed.....keep em comming.
The more there is the better it helps peeps out!
For your old exhaust , take a look underneath when you put the Borla on, and see what it is(obviously HAHA).
If you dont see any writing to tell you what it is, just let us know your set up......DP, MP, diameter etc, and we will go by that.
Now if we can just make this a"sticky" like we been asking!! You can see people are interested.
cheers
Shawn
01-10-03, 10:05 PM
#23
Rotary Enthusiast
Join Date: May 2002
Location: Tallahassee, FL
Posts: 1,205
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Wargasm
What is really needed is a standardized clip... Many video camera mics vary in their ability to record certain ranges...
Maybe the next RX-7 meet I go to where there will be a lot of cars I'll take my camera and get a clip of every car and make it all one movie so that the exhausts can be accurately compared.
Brian
What is really needed is a standardized clip... Many video camera mics vary in their ability to record certain ranges...
Maybe the next RX-7 meet I go to where there will be a lot of cars I'll take my camera and get a clip of every car and make it all one movie so that the exhausts can be accurately compared.
Brian
01-10-03, 11:22 PM
#24
Senior Member
Join Date: Feb 2001
Location: Bellingham, WA
Posts: 723
Likes: 0
Received 0 Likes
on
0 Posts
HKS Super Dragger w/ 2.75" ID Midpipe
http://www.fatboyraceworks.com/~ndah...s/DSCF0243.AVI
http://www.fatboyraceworks.com/~ndah...s/DSCF0243.AVI
