Exhaust Video / Sound Clips - Post em here
Since deciding on what exhaust to get largely depends on the sound, a few members and I thought it would be a good idea to get a thread going and make it a sticky. So please post your video clips that have sound (or just the sound clips). Make sure to describe your setup, including all the exhaust components, single or TT, and type of port.
Thanks everyone, Tom |
Originally posted by SilverOckt and hosted by GotBoostd7 midpipe, Greddy Power Extreme midpipe, RB dual tip Borla XR-1, RB dual tip #1 Borla XR-1, RB dual tip #2 Borla XR-1, RB dual tip, rev to 4500 rpms Oh, btw...I am SOOOOOO glad you did this!! I was thinking about changing to RB dual tip with a Borla XR1!! You just sold me on it!! Sounds EXCELLENT! Here's my annoying ass setup...ATR catback with dp/mp. Tone is actually okay above 4000 rpm, sounds like a rocket ship taking off. But it is just toooo damn loud! ATR catback, ATR midpipe [/B] |
Originally posted by nocab72 My current setup: GT35/40 w/wastegate dumped back to DP, RX7store midpipe & JIC Bullet Titanium Exhaust. WOT @ the track, don't laugh at my ET, bow to the MPH... :D http://flathat.woodstream.net/Columb...g/12.1@123.WMV (1.7Mb) Idling just after new pineapple large street ported motor installation (smoke & crap is from new motor, lol) http://flathat.woodstream.net/Columb...et_Port_IV.WMV (9.5Mb) |
hrmm someone sticky? maybe remove the 'common sense' sticky (last post in november) and replace it with this one?
|
Great Idea!
How about a sticky for BOV's? |
Idling just after new pineapple large street ported motor installation (smoke & crap is from new motor, lol) |
GT-spec anyone?
Does anybody have and sound clips or vids of an FD w/ the A'pex GT-spec catback? I know this is pretty much the highest flowing catback for the FD, and I like its looks even if its a bit ricey. Anyone?????
|
I'm interested in the Border_Racing cat-back or preferrably their full exhaust, i'm sure this clip would be rare but any help would be greatly appreciated :)
|
Originally posted by Droops83 Damn Nocab, sounds crazy . . . does the car always idle that lumpy or is that just cuz the motor had just been installed before that vid? Nice car man. K |
Oh man...that is very nice. I just love the sound of that!! It drives me nuts, and only makes me wanna get one more!
|
What is really needed is a standardized clip... Many video camera mics vary in their ability to record certain ranges...
Maybe the next RX-7 meet I go to where there will be a lot of cars I'll take my camera and get a clip of every car and make it all one movie so that the exhausts can be accurately compared. :) Brian |
Originally posted by Wargasm What is really needed is a standardized clip... Many video camera mics vary in their ability to record certain ranges... Maybe the next RX-7 meet I go to where there will be a lot of cars I'll take my camera and get a clip of every car and make it all one movie so that the exhausts can be accurately compared. :) Brian -Tom |
Dont want to lose this.................bump
|
Re: GT-spec anyone?
Originally posted by Droops83 Does anybody have and sound clips or vids of an FD w/ the A'pex GT-spec catback? I know this is pretty much the highest flowing catback for the FD, and I like its looks even if its a bit ricey. Anyone????? |
does anyone have those nocab videos in mpeg format? i use linux so i cant really use windows media player...
any format besides WMV would be great if anyone could convert them or something. |
great thread! im going to add a borla to my midpipe this weekend. ill record the before and after too. except I donna what exhaust I have on there
|
Originally posted by forcefed1 great thread! im going to add a borla to my midpipe this weekend. ill record the before and after too. except I donna what exhaust I have on there Thats great Forcefed.....keep em comming. The more there is the better it helps peeps out! For your old exhaust , take a look underneath when you put the Borla on, and see what it is(obviously HAHA). If you dont see any writing to tell you what it is, just let us know your set up......DP, MP, diameter etc, and we will go by that. Now if we can just make this a"sticky" like we been asking!! You can see people are interested. cheers Shawn |
Originally posted by Mazdabation Dont want to lose this.................bump I know this is the 3rd gen forum but, could someone get the 20b guys to contribute to this as well. Those sound so f*cking tight. |
Originally posted by YayeR maybe remove the 'common sense' sticky |
Vosko has some video clips of Jspec racers JIC exhaust.
|
just wanted to say congrats on making a sticky!
anthony |
yes, i would also like to hear some 3 rotor FC's or FD's with nice exhaust accelerating... anyone?
|
Originally posted by Wargasm What is really needed is a standardized clip... Many video camera mics vary in their ability to record certain ranges... Maybe the next RX-7 meet I go to where there will be a lot of cars I'll take my camera and get a clip of every car and make it all one movie so that the exhausts can be accurately compared. :) Brian |
HKS Super Dragger w/ 2.75" ID Midpipe
http://www.fatboyraceworks.com/~ndah...s/DSCF0243.AVI |
anyone have N1 Dual w/midpipe or hi flo cat?
|
All times are GMT -5. The time now is 11:23 AM. |
© 2024 MH Sub I, LLC dba Internet Brands