engine wiring harness connector diagram...?
#1
engine wiring harness connector diagram...?
does anyone have a visual layout of a engine harness diagram? just of connectors not breakdown of wires. i need to install an new engine harness. im a single turbo guy so i have all of these new connectors that i have no idea what they are for so just looking for a simple route to put this all together again. if someone has done something along this project please post some helpful tricks. i dont want to go throught the whole wiring diagram tracing wires and labeling the harness.
i have posted in old threads in hopes that i would not have to start a new thread yet i did not pay off. i have helped many forum members with their problems and have showed respect. if you do not have any anything good to contribute please stay out. with that said hopefully someone can help me out here. thanks guys
-Lance
i have posted in old threads in hopes that i would not have to start a new thread yet i did not pay off. i have helped many forum members with their problems and have showed respect. if you do not have any anything good to contribute please stay out. with that said hopefully someone can help me out here. thanks guys
-Lance
#2
~17 MPG
iTrader: (2)
The factory wiring diagram is really going to be the most help, IMHO. The bottom of each page has drawings of the connectors, with the wire colors labeled. That should be plenty of info. Wiring work requires a lot of patience and a very methodical approach. I recommend starting with the Index page, finding each connector and label it with blue painter's tape before you install the new harness in the car.
Wiring diagram can be downloaded from this thread:
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/94-fsms-available-download-449950/
-s-
Wiring diagram can be downloaded from this thread:
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/94-fsms-available-download-449950/
-s-
#3
~17 MPG
iTrader: (2)
PS, you might be interested in this thread:
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/removing-un-needed-crap-wiring-harness-400525/
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/removing-un-needed-crap-wiring-harness-400525/
#5
Moderator
iTrader: (7)
I would lay it in there, and if it fits the connector and reaches from the wiring harness, is very likely a correct match. Mazda did a pretty good job of making the plugs only fit the proper location.
I take it you've read thru the wiring diagram to determine what colors of wire go into each connector, and how to read the connector shape from the diagram? As well, it will show you where in the car/harness each connector is located.
Dave
I take it you've read thru the wiring diagram to determine what colors of wire go into each connector, and how to read the connector shape from the diagram? As well, it will show you where in the car/harness each connector is located.
Dave
Thread
Thread Starter
Forum
Replies
Last Post
befarrer
Microtech
3
08-22-15 05:52 PM