Does anyone have a complete engine wire harness connector identification chart and/or picture with all the connectors labled? I have a '93 FD with manual transmission.

 

The configeration with wire colors is in the factory repair book,I have one .I think you can get it on line .Call me if you need .

 

Pretty much most of the connectors only go to one place with the exception of the:

a) Solenoid connectors: https://www.rx7club.com/3rd-gen-archives-73/color-connectors-solenoids-582230/
b) Fuel and coolant thermosensors
c) Fuel injectors


For B, just look at the wiring diagram for the proper wire color to tell which connector goes to which sensor. Both connectors can reach both.

For C, you can also use the wiring diagram. If you have a fairly new harness, there will be a white band around with the wire cover on each set of the injector connectors. This band identifies which clip goes to front (towards the front of the car) injectors.

 

I started a new thread with an actual picture and all connectors labeled. I need help labeling the last two connectors circled in red.

https://www.rx7club.com/showthread.p...76#post7097576