Hughba

Hi guys.

This is my first post! As a bit of background I recently purchased a genuine Australian delivered series 6. Just wanted to start off by saying how good this forum is for info

Anyway, I've got a leaking oil pan. When I got her up, turns out the engine mount on one side (where it's leaking) is missing a bolt (it is one of the bolts that run through the mount into the block). Mazda Aus don't have any bolts in stock, can't get any in, and don't know the specs. Great.

So basically to save me pulling one out on the other side and possibly disrupting the RTV, I wondered if anybody knew the specs on these bolts? E.g. legth, dia, pitch, etc.

Cheers!
Huw

GoodfellaFD3S

iTrader: (213)

If you don't mind paying shipping, I can mail one out for ya for free, I have some extras.

Mahjik

iTrader: (1)

They are M12x1.25mm. I'm not sure on the length as I used 35mm for mine with an oil pan brace. You could probably use 25-30mm. Make sure to at least get a hardness of 8.8.