electrical problem on my FD
#1
Junior Member
Thread Starter
Join Date: Dec 2002
Location: Wesco CA
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
electrical problem on my FD
ive had this prob for a while now, my instrument cluster doesnt light up but all my aftermarket gauges does...ive checked all the fuses and everything seems ok...i dont know where else to look
#2
Rotary Enthusiast
If you already checked the fueses for the interior lighting then more than likely you have burnt out bulbs. You'll need to pull the instrument panel to get to those.
#6
Junior Member
Thread Starter
Join Date: Dec 2002
Location: Wesco CA
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Air-Rex
Do the tail lights work, there on the same curcuit.
Do the tail lights work, there on the same curcuit.
#7
Junior Member
Thread Starter
Join Date: Dec 2002
Location: Wesco CA
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by djantlive
I doubt if it's the bulb, why would all the bulbs go out at the same time. Look for a short or fuse..
I doubt if it's the bulb, why would all the bulbs go out at the same time. Look for a short or fuse..
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM