Egi/black with white stripe.
#1
Senior Member
Thread Starter
Join Date: Aug 2008
Location: campbell river british columbia
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
Egi/black with white stripe.
Hey
I have a 99 spec FD.
I have an issue with the egi fuse blowing. It seems like the black wire with a white stripe. The one in the engine harness with the two ring terminals is grounding out.
What I have done is put a multimeter in the spot where the fuse goes and have disconnected all the connectors.
Measured volts is 4.1 with everything disconnected except for the ring terminals. I stat connecting things first the 11 pin where the white/green stripe goes to alternator. I noticed when I plug the alternator plug in.. it goes to 5.8 volts. I plugged the connector in beside that one which turns the white/green stripe to a white with a black stripe.
I get to the blue plug inside the car and connect it and I have 12 volts.
At this point I'm getting a bit stumped as to what is happening. I need help. 🤔🤔
Please?
I have a 99 spec FD.
I have an issue with the egi fuse blowing. It seems like the black wire with a white stripe. The one in the engine harness with the two ring terminals is grounding out.
What I have done is put a multimeter in the spot where the fuse goes and have disconnected all the connectors.
Measured volts is 4.1 with everything disconnected except for the ring terminals. I stat connecting things first the 11 pin where the white/green stripe goes to alternator. I noticed when I plug the alternator plug in.. it goes to 5.8 volts. I plugged the connector in beside that one which turns the white/green stripe to a white with a black stripe.
I get to the blue plug inside the car and connect it and I have 12 volts.
At this point I'm getting a bit stumped as to what is happening. I need help. 🤔🤔
Please?
Thread
Thread Starter
Forum
Replies
Last Post
jhammerrx7
3rd Generation Specific (1993-2002)
4
08-09-10 02:02 AM
harley71105
2nd Generation Specific (1986-1992)
9
05-20-04 10:13 AM