rx-7-94

Looking for ECU that won't cost me fortune, I tried pettie, tried the rx-7 store, i though about e-bay but i don't dare to get something like that from there any suggestions would be appreciated....

Mahjik

iTrader: (1)

What are your goals and needs?

If you need a programmable ECU, you find anything more supported and cost effective than the Apexi Power FC.

rynberg

Used Pettit/M2 ecu - $400 from the forum
new PFC - $700-1100 from JDM vendors

rx-7-94

well my biggest goal is for my motor to not pop!! I did look at the power fc but dam thats lots but from what i understand its an excellent investment?

My Mods
Full 3" exhaust high flow cat hks ti muffler
Engine street port and 3m seals
K&n intake
boost controller
egt,boost,temp gauges (non esst.)

Mahjik

iTrader: (1)

That depends on what you want to do with your car. You can use a Pettit ECU which can get you up to about 350-360rwhp with all bolt-ons and a ported motor. If you need/want to go higher, you'll need something like the PFC.

rx-7-94

okay yeah i should pfobally look into the pfc then cuz i would one day like to get around 400-450 hp, and also go single turbo but im not gonna spend the money on that tell my seq system starts havin lots of problems..thanks man

Lupercal_CATS

Your not going to spend money till you have "lots of problems".

Earlier you said you wanted a ECU so you wouldn't "pop your motor".

Mahjik

iTrader: (1)

I believe he was referring to his single conversion he wants to do later (and having lots of problems with the sequential system).

rx-7-94

yes that is what i ment thats why i was goin just to do like couple hundred now but since you cant really get one that cheap i might as well get the better one so its ready for one day when i do go single so i just wont drive it much for the time being since it is just my toy car alg with couple others..

Lupercal_CATS

Oooops, sorry.

I'll shut my mouth.