ebc install help
#1
triangles
Thread Starter
Join Date: Aug 2004
Location: Centennial, CO
Posts: 885
Likes: 0
Received 0 Likes
on
0 Posts
ebc install help
yeah i have searched a ton for awhile now and i have read all the how too`s i can find. and their great...but now that im finally doing it i still have some things im not sure on...
the guide im using is the one found at fd3s.org, which is great BUT...
im not 100% which is the hose with the pill that needs to be bridged between the turbo and the wg. if anyone has a picture or can explain it very clearly that would be great!
next question, about the black box. on their install they have info for a profec spec b, but it looks way different. i have a b spec II. im not quite sure which is the IN, where the hose FROM the turbo goes, and OUT which goes back to the wg. and theres 3 things on the box. i need to know what all i need to do to have this all hooked up correctly. they have something i think refering to this but i wasnt quite sure what it was saying...it wasnt in the install part. it simply says run hose from the turbo to the "in" and from the "out" to the wastegate. but it looks like i got more to it than that...
last and most simple question, for the power hook up...wheres a good easy place to hook the ground and stuff (red and the black wires) i hate wiring i like to know exactly what i need to do, i suck at figuring out myself...i want to know what other people do that works good.
i had one more but i figured it out...yea im sure its been asked a lot, but i honestly tried and i still had questions, tried to be specific. if someone can take the time to help that would be great!
i took a couple pictures too, if someone doesnt have any but could just point it out for me. thanks a lot!
the guide im using is the one found at fd3s.org, which is great BUT...
im not 100% which is the hose with the pill that needs to be bridged between the turbo and the wg. if anyone has a picture or can explain it very clearly that would be great!
next question, about the black box. on their install they have info for a profec spec b, but it looks way different. i have a b spec II. im not quite sure which is the IN, where the hose FROM the turbo goes, and OUT which goes back to the wg. and theres 3 things on the box. i need to know what all i need to do to have this all hooked up correctly. they have something i think refering to this but i wasnt quite sure what it was saying...it wasnt in the install part. it simply says run hose from the turbo to the "in" and from the "out" to the wastegate. but it looks like i got more to it than that...
last and most simple question, for the power hook up...wheres a good easy place to hook the ground and stuff (red and the black wires) i hate wiring i like to know exactly what i need to do, i suck at figuring out myself...i want to know what other people do that works good.
i had one more but i figured it out...yea im sure its been asked a lot, but i honestly tried and i still had questions, tried to be specific. if someone can take the time to help that would be great!
i took a couple pictures too, if someone doesnt have any but could just point it out for me. thanks a lot!
#3
triangles
Thread Starter
Join Date: Aug 2004
Location: Centennial, CO
Posts: 885
Likes: 0
Received 0 Likes
on
0 Posts
thank u sir...that helps A LOT! y the hell didnt that come up when i was searching?? ahhh
...still need help with the other stuff, but im still looking atm as well.
...still need help with the other stuff, but im still looking atm as well.
#4
triangles
Thread Starter
Join Date: Aug 2004
Location: Centennial, CO
Posts: 885
Likes: 0
Received 0 Likes
on
0 Posts
ok that link, and believe it or not the unreadable japanese instructions put me on the right track...i figured out what to use for the in and out...i could tell from the diagram the diff ones for the external wastegate...then of course i double checked and i did get it right
just 1 more thing, just to be SURE!!! ok 3 openings in my actuator. i got the in, i got the out...i would assume from what im reading i dont do anything, BUT do i need to plug the 3rd somehow??
that should do it...thanks
just 1 more thing, just to be SURE!!! ok 3 openings in my actuator. i got the in, i got the out...i would assume from what im reading i dont do anything, BUT do i need to plug the 3rd somehow??
that should do it...thanks
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM