Hi. I was in the middle of wiring up my HyFire 6 for my leading coil. I cut the connector for the coil from the harness. i carefully removed the orange seal in teh connector and used a pin to release the catch tabs on the connectors inside the plug. So I pulled both metal connector pins out of the plastic connector housing right? thign is I forgot which one went where. There is a Yellow/Blue and a Black/Red wire. I just need to know which one goes on top. The top meaning the side with the plastic release tab. It is also on top when plugged in. Would anyone happen to know which goes where?

Thanks,
Rolf

 

bump

 

Come on lol, can't somebody go look at their Leading coila nd tell me which wire is the one on top? I'm desperate here.

 

Why don't you take the time to down load the 94 FSM and electrical diagram.....a little self help will go along way.

 

i was hoping someone would just respond real quick i didnt feel like looking at the diagram. i ended up looking at it and i guess all 3 coils have the red/black wire on the top and then their individually colored wires on the bottom