Easy Quick Question. Anyone can help. Please!
#1
Senior Member
Thread Starter
Join Date: Jul 2006
Location: Stow, Ohio
Posts: 582
Likes: 0
Received 0 Likes
on
0 Posts
Easy Quick Question. Anyone can help. Please!
Hi. I was in the middle of wiring up my HyFire 6 for my leading coil. I cut the connector for the coil from the harness. i carefully removed the orange seal in teh connector and used a pin to release the catch tabs on the connectors inside the plug. So I pulled both metal connector pins out of the plastic connector housing right? thign is I forgot which one went where. There is a Yellow/Blue and a Black/Red wire. I just need to know which one goes on top. The top meaning the side with the plastic release tab. It is also on top when plugged in. Would anyone happen to know which goes where?
Thanks,
Rolf
Thanks,
Rolf
#5
Senior Member
Thread Starter
Join Date: Jul 2006
Location: Stow, Ohio
Posts: 582
Likes: 0
Received 0 Likes
on
0 Posts
i was hoping someone would just respond real quick i didnt feel like looking at the diagram. i ended up looking at it and i guess all 3 coils have the red/black wire on the top and then their individually colored wires on the bottom
Thread
Thread Starter
Forum
Replies
Last Post
Adaptronic MTX-L to adaptronic question
TeamRuffRacing
Adaptronic Engine Mgmt - AUS
1
09-30-15 08:13 PM