Drag racing slicks...that are stock height?
Thread Starter
Senior Member
Joined: Jan 2002
Posts: 401
Likes: 0
From: canada
Drag racing slicks...that are stock height?
i just lowered my car with the Koni's and now my M and H drag radials do not fit. They are a bit too tall. 305/40/16. The same ones that Brooks Weisblat used.
Drag racing the Back end swats really bad. I need a
tire or Drag radial that is stock height (to avoid the tire hitting the wheel wells) with good traction
and that will fit a 16" rim.
Any ideas?
thanks
jc
Drag racing the Back end swats really bad. I need a
tire or Drag radial that is stock height (to avoid the tire hitting the wheel wells) with good traction
and that will fit a 16" rim.
Any ideas?
thanks
jc
Last edited by racer rx; Jul 4, 2002 at 01:08 AM.
Z06 powered FD
Joined: Mar 2001
Posts: 1,883
Likes: 0
From: Dallas, Texas
Hoosier makes alot of "dirt track" tires that are great as street radials, you may also check out there "Indy" tires. I don't think the ET streets come in 16" so you're looking at BFG or Nitto.
Thread
Thread Starter
Forum
Replies
Last Post
