Down Pipes from ebay!!
#1
Full Member
Thread Starter
Down Pipes from ebay!!
I dont know if you had that subject before, but i've seen a lot of downlpipes on ebay's and they are very cheap...so which one of those cheap brands that you find there do you recommend????
Cheers,
Talal
Cheers,
Talal
#4
Dp
I bought one from someone who must have bought it on e bay. It did not fit and it was a major pain to find that out. When your doing this job, you don't want any extra problems. Buy from some place that will stand behind it and who you can find later if there is a problem. Not worth the savings.
#6
Eats, Sleeps, Dreams Rotary
iTrader: (14)
Used brand-name downpipes in the classifieds section can be found very cheaply. I found a Bonez SS one for $60 or so, which was probably a slightly better deal than average but not much so. Given the pain involved installing a downpipe it is probably worth paying $50 or so more to ensure that it will actually fit.
Trending Topics
#8
Senior Member
Join Date: Jul 2004
Location: lemoore ca
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by S-MAN
If your interested i have a GReddy EVO down pipe. It only has 10k on it. I'm getting rid of it because i went single.
#10
Full Member
Thread Starter
Originally Posted by snagalittle
I have a dp i will sell for 80$ plus shiping. I went single and need the cash right now. I belive it is hks. Not for shure. All i know is it is stainless
#13
blackhole on wheels
Join Date: May 2001
Location: Chapin,SC
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
I bought a Mugen down and mid pipe from ebay and only problem was the turbo to pipe gasket. It didn't bother me much cause I had a spare factory one. It has done quite well for the last 10k. Shipped to the door was I think was 125.00.
#14
TRINGLS
Join Date: Apr 2004
Location: Clermont, FL
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
It is a mixed bag from those companies as some of thiers come out fitting like a champ, others are a PITA. Mine from Meghan fit very well but was a tight squeeze to get in -- I also had to grind down some of the welds around the bolt areas but otherwise the part was great.
~Kris
~Kris
Thread
Thread Starter
Forum
Replies
Last Post