DOh! Just install my M2 CF airbox and see that Rotaryextreme is making one!
#1
Eats, Sleeps, Dreams Rotary
Thread Starter
DOh! Just install my M2 CF airbox and see that Rotaryextreme is making one!
Not saying I don't like the M2 (Raceshop) box...which I DO. The fitment is actually better than my previous box. I just like deep clear on Chuck's new box ...
Oh well.
I was actually just hunting around for vented hoods and was looking at the odula's when I went to Chuck's site to see if he was a vendor.
Anyways, enjoy the pic
Oh well.
I was actually just hunting around for vented hoods and was looking at the odula's when I went to Chuck's site to see if he was a vendor.
Anyways, enjoy the pic
#2
BNR built motor and twins
Join Date: May 2003
Location: 2 hours drive from sanity
Posts: 1,235
Likes: 0
Received 1 Like
on
1 Post
I've been meaning to ask Chuck if he was going to make one of these, BUT it doesn't say it works with his V mount set up. Also, I'd need one with out the extra hose connections...
#5
Eats, Sleeps, Dreams Rotary
Thread Starter
I thought the "Raceshop" who supplied M2 made it? Mine isn't that shiny.
Maybe he just made the aluminum backing plates?
not that it really matters under the hood.
Kento, can you see a seam in yours?
here is mine
Maybe he just made the aluminum backing plates?
not that it really matters under the hood.
Kento, can you see a seam in yours?
here is mine
#6
2/4 wheel cornering fiend
Yeah, I faintly recall that on my box as well; don't have my car with me at the moment, so I don't know for certain. Doesn't bug me much even if it did. It works.
#7
King of the Duct Tape
Join Date: Feb 2001
Location: PA
Posts: 1,177
Likes: 0
Received 0 Likes
on
0 Posts
Hey 7racer, did you get a duct from a large IC and use a medium IC or what? I notice it covers all the pass. side endtank and some of the driver. Better than not enough coverage for sure!
sorry for thread hijack
sorry for thread hijack
Trending Topics
#8
Eats, Sleeps, Dreams Rotary
Thread Starter
airborne that is the standard medium duct. I know that I got the intercooler when Kevin Wyum restarted making them and he sold it with the squared off side (drivers) instead of the tapered ones that M2 modified. Maybe that's why it looks to fit better???
Last edited by 7racer; 08-08-05 at 07:07 PM.
#9
Eats, Sleeps, Dreams Rotary
Thread Starter
Originally Posted by Kento
Yeah, I faintly recall that on my box as well; don't have my car with me at the moment, so I don't know for certain. Doesn't bug me much even if it did. It works.
I agree it works....but it bothers me alittle
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM