DIY oil cooler line routing
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Apr 2006
Location: Austin, TX
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
DIY oil cooler line routing
Hey guys,
To those of you who have put in your own oil coolers, and more importantly those of who have run your own stainless braided lines, where/how did you route the lines?
After looking at several pictures, it looks like running the line between the two oil coolers is pretty easy, it just runs along the front of the frame. However, I haven't seen any good pictures of where people ran the lines from the oil filter down to a thermostat, from the thermostat to the first oil cooler, and from the second oil cooler back to the thermostat. Anyone have any good close-up pics?
- Andy
To those of you who have put in your own oil coolers, and more importantly those of who have run your own stainless braided lines, where/how did you route the lines?
After looking at several pictures, it looks like running the line between the two oil coolers is pretty easy, it just runs along the front of the frame. However, I haven't seen any good pictures of where people ran the lines from the oil filter down to a thermostat, from the thermostat to the first oil cooler, and from the second oil cooler back to the thermostat. Anyone have any good close-up pics?
- Andy
Thread
Thread Starter
Forum
Replies
Last Post