3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Defi D water temp gauge install?

Thread Tools
 
Search this Thread
 
Old Aug 18, 2006 | 10:20 AM
  #1  
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Nov 2003
Posts: 23
Likes: 0
From: VA
Defi D water temp gauge install?

Am installing Defi D water temp gauge. Tapped the illumination wires to ashtray light. Temp sensor to throttle body coolant hose. Do not know where to tap in the Orange and Red wires. Want to tap the Orange IGN wire and Red 12V Battery wire into fuse box under dash using fuse taps. What fuses shound I tap which wire into? Suggestions appreaciated. Thanks. Don
Reply
Old Aug 18, 2006 | 04:22 PM
  #2  
BillM's Avatar
RX-7's since 1980
Tenured Member 15 Years
iTrader: (4)
 
Joined: May 2006
Posts: 801
Likes: 59
From: NYC
There is a connection point on the top of the underdash fuse box for ignition power, use a spade terminal and just push it in the slot
Reply
Old Aug 18, 2006 | 05:04 PM
  #3  
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Nov 2003
Posts: 23
Likes: 0
From: VA
Thanks for the response. I looked at the under dash fuse box but am not sure where you mean. Is it inside the fuse box cover or on top? Have a picture?
Reply
Old Aug 18, 2006 | 07:02 PM
  #4  
tphan's Avatar
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: May 2004
Posts: 886
Likes: 1
From: Dallas, Texas
here u go...

P.S. This picture was posted by Majik or Rynberg...I think.

it work for me...
Attached Thumbnails Defi D water temp gauge install?-mvc-003f.jpg  
Reply
Old Aug 18, 2006 | 09:34 PM
  #5  
BillM's Avatar
RX-7's since 1980
Tenured Member 15 Years
iTrader: (4)
 
Joined: May 2006
Posts: 801
Likes: 59
From: NYC
blue wire and spade connector slides right in
Attached Thumbnails Defi D water temp gauge install?-fusebox.jpg  
Reply
Old Aug 19, 2006 | 07:14 AM
  #6  
Sgtblue's Avatar
Urban Combat Vet
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (16)
 
Joined: Oct 2003
Posts: 12,160
Likes: 983
From: Mid-west
Originally Posted by BillM
blue wire and spade connector slides right in
^+1 on this location. Just add an in-line fuse.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
Feb 24, 2019 12:09 PM
Snoopy FD
Build Threads
25
Dec 8, 2015 01:45 PM
LMBTG
New Member RX-7 Technical
7
Aug 15, 2015 01:43 PM




All times are GMT -5. The time now is 07:13 AM.