3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

cutting out problem

Old Jun 9, 2004 | 01:36 AM
  #1  
salticracka's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jun 2004
Posts: 5
Likes: 0
From: terrell, tx.
cutting out problem

i have a 93 rx-7 catback, midpipe, downpipe, and intake. it is an automatic trans. Runs close too 10 psi boost. When pedal to the floor it cuts out right at the end of second gear. Again in drive, pedal down at around 4000 rpm. Don't know what it is. I was thinking fuel related. any ideas
Reply
Old Jun 9, 2004 | 01:38 AM
  #2  
Fatman0203's Avatar
Eats, Sleeps, Dreams Rotary
Tenured Member 05 Years
 
Joined: May 2003
Posts: 3,639
Likes: 0
From: MIA
stock ECU you may be going over 10 psi with a midpipe. IF your guage is acurate, then could be something els
Reply
Old Jun 9, 2004 | 01:40 AM
  #3  
salticracka's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jun 2004
Posts: 5
Likes: 0
From: terrell, tx.
could be the gauge. any ideas on what ecu to go with
Reply
Old Jun 9, 2004 | 01:41 AM
  #4  
salticracka's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jun 2004
Posts: 5
Likes: 0
From: terrell, tx.
or is there anything you can do to the stock one that anyone knows of
Reply
Old Jun 9, 2004 | 01:43 AM
  #5  
Fatman0203's Avatar
Eats, Sleeps, Dreams Rotary
Tenured Member 05 Years
 
Joined: May 2003
Posts: 3,639
Likes: 0
From: MIA
Originally posted by salticracka
or is there anything you can do to the stock one that anyone knows of
U could Piggy back it, but rather go with a Apexi Power FC
Reply
Old Jun 9, 2004 | 01:44 AM
  #6  
salticracka's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jun 2004
Posts: 5
Likes: 0
From: terrell, tx.
i was thinking that would be the answer, thanks
Reply
Old Jun 9, 2004 | 01:51 AM
  #7  
Fatman0203's Avatar
Eats, Sleeps, Dreams Rotary
Tenured Member 05 Years
 
Joined: May 2003
Posts: 3,639
Likes: 0
From: MIA
Originally posted by salticracka
i was thinking that would be the answer, thanks
BTW the Auto Tranny cant hold to much HP. I think 300 rwhp maybe a bit more is about it.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
Mar 20, 2018 01:54 PM
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:11 AM.