3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

cutting out problem

Thread Tools
 
Search this Thread
 
Old 06-09-04, 01:36 AM
  #1  
Junior Member

Thread Starter
 
salticracka's Avatar
 
Join Date: Jun 2004
Location: terrell, tx.
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
cutting out problem

i have a 93 rx-7 catback, midpipe, downpipe, and intake. it is an automatic trans. Runs close too 10 psi boost. When pedal to the floor it cuts out right at the end of second gear. Again in drive, pedal down at around 4000 rpm. Don't know what it is. I was thinking fuel related. any ideas
Old 06-09-04, 01:38 AM
  #2  
Eats, Sleeps, Dreams Rotary

 
Fatman0203's Avatar
 
Join Date: May 2003
Location: MIA
Posts: 3,639
Likes: 0
Received 0 Likes on 0 Posts
stock ECU you may be going over 10 psi with a midpipe. IF your guage is acurate, then could be something els
Old 06-09-04, 01:40 AM
  #3  
Junior Member

Thread Starter
 
salticracka's Avatar
 
Join Date: Jun 2004
Location: terrell, tx.
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
could be the gauge. any ideas on what ecu to go with
Old 06-09-04, 01:41 AM
  #4  
Junior Member

Thread Starter
 
salticracka's Avatar
 
Join Date: Jun 2004
Location: terrell, tx.
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
or is there anything you can do to the stock one that anyone knows of
Old 06-09-04, 01:43 AM
  #5  
Eats, Sleeps, Dreams Rotary

 
Fatman0203's Avatar
 
Join Date: May 2003
Location: MIA
Posts: 3,639
Likes: 0
Received 0 Likes on 0 Posts
Originally posted by salticracka
or is there anything you can do to the stock one that anyone knows of
U could Piggy back it, but rather go with a Apexi Power FC
Old 06-09-04, 01:44 AM
  #6  
Junior Member

Thread Starter
 
salticracka's Avatar
 
Join Date: Jun 2004
Location: terrell, tx.
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
i was thinking that would be the answer, thanks
Old 06-09-04, 01:51 AM
  #7  
Eats, Sleeps, Dreams Rotary

 
Fatman0203's Avatar
 
Join Date: May 2003
Location: MIA
Posts: 3,639
Likes: 0
Received 0 Likes on 0 Posts
Originally posted by salticracka
i was thinking that would be the answer, thanks
BTW the Auto Tranny cant hold to much HP. I think 300 rwhp maybe a bit more is about it.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
03-20-18 01:54 PM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
The1Sun
New Member RX-7 Technical
5
09-15-15 04:45 PM
sherff
Adaptronic Engine Mgmt - AUS
5
09-12-15 12:22 PM



Quick Reply: cutting out problem



All times are GMT -5. The time now is 01:01 PM.