Coolant low light with Koyo Radiator
#1
Banned. I got OWNED!!!
Thread Starter
Join Date: Mar 2002
Location: Las Vegas, NV
Posts: 4,236
Likes: 0
Received 0 Likes
on
0 Posts
Coolant low light with Koyo Radiator
What are you guys doing about the coolant level low light in the dash with a aftermarket radiator? Just grounding out the sensor wire? Where is the wire located? I'm thinking i just need to ground it out.. Thanks
#2
touge******
i had this problem check behind the power steering pump there is a wire that comes off the metering oil pump plug and goes to a single wire plug behind that pump and i comes loose every so often
pm me if u need more help
pm me if u need more help
#3
Banned. I got OWNED!!!
Thread Starter
Join Date: Mar 2002
Location: Las Vegas, NV
Posts: 4,236
Likes: 0
Received 0 Likes
on
0 Posts
I have a koyo aftermarket radiator. They don't have a sensor on the rediator... that's why the light is on
#4
Senior Member
iTrader: (5)
Join Date: Feb 2004
Location: nj & st.croix
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
What car do you have KOYO RAD FOR?????
FD Don't have a sensor on radiator......
FC Do have sensor on radiator.....
Sensor for FD is on the FRONT of the water pump.....
single black wire with a clip...
FD Don't have a sensor on radiator......
FC Do have sensor on radiator.....
Sensor for FD is on the FRONT of the water pump.....
single black wire with a clip...
Last edited by streetRx7; 07-22-07 at 02:47 PM.
#5
Banned. I got OWNED!!!
Thread Starter
Join Date: Mar 2002
Location: Las Vegas, NV
Posts: 4,236
Likes: 0
Received 0 Likes
on
0 Posts
Oh ok.. I have not messed with the FD that much.. always owned SA's and FC's... It's a FD Koyo.. So the sensor is on the water pump? And pics of the sensor? or sensor wire colors?
Trending Topics
#9
Banned. I got OWNED!!!
Thread Starter
Join Date: Mar 2002
Location: Las Vegas, NV
Posts: 4,236
Likes: 0
Received 0 Likes
on
0 Posts
Just looked under the hood and see the sensor but no wire.... Now is the sensor wire part of the engine harness? I have a standalone link ECU installed on the 3 rotor under the hood.. I need to ground out the wire after i find it.. Where can i trace it from?
#12
Banned. I got OWNED!!!
Thread Starter
Join Date: Mar 2002
Location: Las Vegas, NV
Posts: 4,236
Likes: 0
Received 0 Likes
on
0 Posts
That's on a stock engine harness right? So i will have to ground it at the factory ECU plug on the pass side because i'm running an aftermarklet ecu correct?