3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Which Connectors are these for?

Thread Tools
 
Search this Thread
 
Old May 26, 2004 | 08:22 PM
  #1  
HeatTreated's Avatar
Thread Starter
Hi Powr FD's
Tenured Member 05 Years
 
Joined: Oct 2002
Posts: 806
Likes: 0
From: OKC
Which Connectors are these for?

I know its a shot in the dark.. but after installing the new engine and cleaning up the wiring with the help from a friend, I have these 3 left. I just dont see which ones these connect too. let me know what you think. Who knows they may be ones I dont need. But Im not sure.

Reply
Old May 26, 2004 | 08:31 PM
  #2  
c00lduke's Avatar
Rotary Freak
Tenured Member 20 Years
 
Joined: Jan 2002
Posts: 2,360
Likes: 0
From: Overland Park, KS
they look like they go down to the trannybut where they come out of the harness looks wrong though
Reply
Old May 26, 2004 | 09:05 PM
  #3  
Full Member
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 178
Likes: 0
From: ohio
they kinda look like they go under the uim. the round one looks like the o2 sensor plug. could they go to the wiring to the headlights? or they could go for the power steering in that area
Reply
Old May 26, 2004 | 09:08 PM
  #4  
rotarypower101's Avatar
sdrawkcab
Tenured Member: 20 Years
Liked
Loved
iTrader: (1)
 
Joined: Mar 2002
Posts: 1,922
Likes: 1
From: Portland Oregon
tranny
Reply
Old May 26, 2004 | 10:26 PM
  #5  
mad_7tist's Avatar
Rotary Freak
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 1,899
Likes: 0
From: tampa
th
Reply
Old May 26, 2004 | 10:46 PM
  #6  
JONSKI's Avatar
5yr member, joined 2001
Tenured Member 15 Years
 
Joined: Dec 2001
Posts: 908
Likes: 1
From: Marco Island, FL
My guesses:

airpump clutch (grey w/ orange insert)
wastegate solenoid (black w/ yellow insert)
turbo pre-control solenoid (also black w/ yellow insert)
Reply
Old May 26, 2004 | 11:31 PM
  #7  
93BlackFD's Avatar
built my own engine
Tenured Member 05 Years
 
Joined: Dec 2002
Posts: 3,470
Likes: 2
From: Buckhead, Atlanta
that's the tranny harness, it should be going back torwards the rear of the car, not forward under the UIM
Reply
Old May 27, 2004 | 08:11 AM
  #8  
dubulup's Avatar
development
Tenured Member 15 Years
 
Joined: Aug 2002
Posts: 5,714
Likes: 7
From: Lafayette, LA
1-2 switch, nuetral sw, back up lights, and speed sensor

on the tranny.

this is FACT.
Reply
Old May 27, 2004 | 08:34 AM
  #9  
DamonB's Avatar
Lives on the Forum
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 9,617
Likes: 8
From: Dallas


New engines need new hoses. The one by the alt is trying to tell you to replace it.
Reply
Old May 27, 2004 | 08:40 AM
  #10  
HeatTreated's Avatar
Thread Starter
Hi Powr FD's
Tenured Member 05 Years
 
Joined: Oct 2002
Posts: 806
Likes: 0
From: OKC
Thanks guys! Im betting the tranny ones are right.


"New engines need new hoses. The one by the alt is trying to tell you to replace it."

Yeah, I plan on doing that one.
Reply
Old May 27, 2004 | 09:37 AM
  #11  
Scrub's Avatar
bow leggin'
Tenured Member: 20 Years
iTrader: (25)
 
Joined: Jul 2002
Posts: 6,061
Likes: 5
From: Delaware
Im gonna have to agree with everyone else on this noe.....stick them suckers down behind the engine and see if there are connectors that don't have anything connected to them.
Reply
Old May 27, 2004 | 09:58 AM
  #12  
dubulup's Avatar
development
Tenured Member 15 Years
 
Joined: Aug 2002
Posts: 5,714
Likes: 7
From: Lafayette, LA
Originally posted by HeatTreated
Thanks guys! Im betting the tranny ones are right.

no need to bet...those connectors go to the tranny, end of story.
Reply
Old May 27, 2004 | 09:58 AM
  #13  
jdhuegel1's Avatar
Glug Glug Glug Burp
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 3,819
Likes: 0
From: Scott AFB, IL
155% POSITIVE they are for the tranny. But I think we figured that out. Just adding influence!
Reply
Old May 27, 2004 | 10:15 AM
  #14  
DamonB's Avatar
Lives on the Forum
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 9,617
Likes: 8
From: Dallas
Originally posted by HeatTreated

"New engines need new hoses. The one by the alt is trying to tell you to replace it."

Yeah, I plan on doing that one.
You also forgot to put the solenoid rack back in!
Reply
Old May 27, 2004 | 02:46 PM
  #15  
XSTransAm's Avatar
Ee / Cpe
Tenured Member 05 Years
 
Joined: Jan 2003
Posts: 2,843
Likes: 2
From: Gaithersburg, MD / WVU
forgot, lol
Reply
Old May 27, 2004 | 04:40 PM
  #16  
wiblergt's Avatar
Senior Member
Tenured Member: 20 Years
Liked
Loved
iTrader: (2)
 
Joined: Sep 2003
Posts: 486
Likes: 18
From: Scottsdale, AZ
they go to the FLUX CAPACITOR!!!

two in the front... and two in the back!!!
Reply




All times are GMT -5. The time now is 08:38 PM.