RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Which Connectors are these for? (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/connectors-these-310609/)

HeatTreated 05-26-04 08:22 PM

Which Connectors are these for?
 
I know its a shot in the dark.. but after installing the new engine and cleaning up the wiring with the help from a friend, I have these 3 left. I just dont see which ones these connect too. let me know what you think. Who knows they may be ones I dont need. But Im not sure.

http://oklahomaspeed.com/pics/KIF_0006.JPG

c00lduke 05-26-04 08:31 PM

they look like they go down to the trannybut where they come out of the harness looks wrong though

trik7 05-26-04 09:05 PM

they kinda look like they go under the uim. the round one looks like the o2 sensor plug. could they go to the wiring to the headlights? or they could go for the power steering in that area

rotarypower101 05-26-04 09:08 PM

tranny

mad_7tist 05-26-04 10:26 PM

th

JONSKI 05-26-04 10:46 PM

My guesses:

airpump clutch (grey w/ orange insert)
wastegate solenoid (black w/ yellow insert)
turbo pre-control solenoid (also black w/ yellow insert)

93BlackFD 05-26-04 11:31 PM

that's the tranny harness, it should be going back torwards the rear of the car, not forward under the UIM

dubulup 05-27-04 08:11 AM

1-2 switch, nuetral sw, back up lights, and speed sensor

on the tranny.

this is FACT.

DamonB 05-27-04 08:34 AM

http://oklahomaspeed.com/pics/KIF_0006.JPG

New engines need new hoses. The one by the alt is trying to tell you to replace it.

HeatTreated 05-27-04 08:40 AM

Thanks guys! Im betting the tranny ones are right.


"New engines need new hoses. The one by the alt is trying to tell you to replace it." :)

Yeah, I plan on doing that one.

Scrub 05-27-04 09:37 AM

Im gonna have to agree with everyone else on this noe.....stick them suckers down behind the engine and see if there are connectors that don't have anything connected to them.

dubulup 05-27-04 09:58 AM


Originally posted by HeatTreated
Thanks guys! Im betting the tranny ones are right.


no need to bet...those connectors go to the tranny, end of story.

jdhuegel1 05-27-04 09:58 AM

155% POSITIVE they are for the tranny. But I think we figured that out. Just adding influence! :)

DamonB 05-27-04 10:15 AM


Originally posted by HeatTreated

"New engines need new hoses. The one by the alt is trying to tell you to replace it." :)

Yeah, I plan on doing that one.

You also forgot to put the solenoid rack back in! ;)

XSTransAm 05-27-04 02:46 PM

forgot, lol

wiblergt 05-27-04 04:40 PM

they go to the FLUX CAPACITOR!!!

two in the front... and two in the back!!!


All times are GMT -5. The time now is 06:16 PM.


© 2024 MH Sub I, LLC dba Internet Brands