confirm air-temp sensor pn# on UIM
#1
confirm air-temp sensor pn# on UIM
Section 1300 shows the UIM, but no air-temp sensor.
Section 6600 (p.2) show an air-temp sensor (18-845) but from the diagram it looks like it's going to the rotor housing, NOT the UIM.
18-845 shows a pn# of: N3A1-18-845
Can someone please confirm this is the correct air-temp sensor located on the UIM ?
Thanks,
:-) neil
Section 6600 (p.2) show an air-temp sensor (18-845) but from the diagram it looks like it's going to the rotor housing, NOT the UIM.
18-845 shows a pn# of: N3A1-18-845
Can someone please confirm this is the correct air-temp sensor located on the UIM ?
Thanks,
:-) neil
#2
Full Member
The air-temp sensor is located on the underside of the upper intake manifold. It is a pain in the *** to get to. But yes, it is in the center of the plenum, on the underside.
Thread
Thread Starter
Forum
Replies
Last Post
Adaptronic 1280s Hot Start 3 Rotor 20b RX7
Monsterbox
Adaptronic Engine Mgmt - AUS
5
09-11-15 03:29 PM