clutch compatibility
Thread Starter
Full Member
Joined: May 2004
Posts: 220
Likes: 0
From: MN
clutch compatibility
Ok, here's the deal.
I have a 20b with a 2nd gen transmission coupled to it.
Can I use that clutch when I hookup my 3rd gen transmission?
Is there a spline difference? Shaft diameter difference?
Travis
I have a 20b with a 2nd gen transmission coupled to it.
Can I use that clutch when I hookup my 3rd gen transmission?
Is there a spline difference? Shaft diameter difference?
Travis
Senior Member
Joined: Oct 2002
Posts: 394
Likes: 1
From: Bartlesville, OK.
The clutch alignment tool I just purchased and used on my FD shows to be a 1”x 23 spline. I got it from O’Reilly Auto for $2.39; Dorman #14503. Maybe this will help verify if the 2nd gen is the same size.
Junior Member
Joined: Dec 2003
Posts: 47
Likes: 1
From: lancaster, ca
2nd gen has the same spline as 3rd gen. Of course the 3rd gen is a pull type pressure plate while the 2nd gen is push type. ACT has whichever clutch you need to tame the beast of the 3 rotor (shameless plug).
Thread
Thread Starter
Forum
Replies
Last Post
