3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

clunking from front end?

Old Jun 21, 2003 | 10:58 AM
  #1  
yellowy2kc5's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jan 2003
Posts: 12
Likes: 0
From: DFW
clunking from front end?

Anyone know what would cause a clunking in the front driver side during slow turns and braking? I've done a search and seen sway bar bushings mentioned-any other likely causes? The car has 160k miles on it so I assume something is just worn out I couldn't feel anything that seemed real loose when I jacked the car up to look around. The steering also feels slightly loose on the highway, but not too bad. I assume this is also related to some worn bushings. I plan to replace all the bushings in the future, but for now I just want to fix the clunking. Thanks for any input.

Eric
Reply
Old Jun 21, 2003 | 04:39 PM
  #2  
speed7's Avatar
-.-
Tenured Member 20 Years
 
Joined: Jun 2003
Posts: 265
Likes: 0
From: San Diego, CA
On my 85 the bushings in the front end just needed to be tightened. Then that stopped all noises. I hear the same thing in my FD I just got so I'll take it in and have them do that or just replace then with engergy suspension.
Reply
Old Jun 22, 2003 | 09:27 AM
  #3  
yellowy2kc5's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jan 2003
Posts: 12
Likes: 0
From: DFW
Thanks, I'm pretty sure it is the bushings, I was hoping to only have to replace whichever ones were the culprit though, but considering the cars mileage a whole new set is probably in order anyway
Reply
Old Jun 22, 2003 | 01:01 PM
  #4  
Svelte_7's Avatar
Back on the road again!
Tenured Member: 20 Years
iTrader: (4)
 
Joined: May 2002
Posts: 447
Likes: 1
From: Bay Area
I had the same clunking you're talking about and I had to replace both of the lower A-arms bushings on each side and the passenger side end-link.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FD7KiD
3rd Generation Specific (1993-2002)
15
Feb 26, 2021 10:12 PM
NCross
1st Generation Specific (1979-1985)
9
Aug 29, 2015 01:55 PM
Michael Mansour
New Member RX-7 Technical
7
Aug 18, 2015 03:13 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:51 AM.