Check out my Intake Manifold Polishing Job
Thread Starter
Locust of the apocalypse
Joined: Apr 2003
Posts: 2,553
Likes: 2
From: Directly above the center of the earth (York, PA)
It takes us two weeknights after our dayjobs to do a 3rd gen.... if we get it on a friday, it WILL ship the following monday.
20b's take longer, but because its so damn cool, will do a 20b for the same price as the third gen stuff!
20b's take longer, but because its so damn cool, will do a 20b for the same price as the third gen stuff!
Thread Starter
Locust of the apocalypse
Joined: Apr 2003
Posts: 2,553
Likes: 2
From: Directly above the center of the earth (York, PA)
Eveybody wants to know so here it is...
Polishing for the "bling bling" job is 300 for a full setup, 225 for the Full Bling on the UIM and TBody and a general fluff, but still nice, on the LIM. We concentrate on the flat surfaces and runners, but don't get into the nooks and crannys as much on a "fluff job)
We WILL NOT, let the UIM's go out the door with a Fluff job, I can't bear it, only the LIM's because you don't see that much of 'em anyway.
Polishing for the "bling bling" job is 300 for a full setup, 225 for the Full Bling on the UIM and TBody and a general fluff, but still nice, on the LIM. We concentrate on the flat surfaces and runners, but don't get into the nooks and crannys as much on a "fluff job)
We WILL NOT, let the UIM's go out the door with a Fluff job, I can't bear it, only the LIM's because you don't see that much of 'em anyway.
Thread Starter
Locust of the apocalypse
Joined: Apr 2003
Posts: 2,553
Likes: 2
From: Directly above the center of the earth (York, PA)
Its een pointed out that EVERYBODY, doesn't have the aluminum elbows like in the pics... My bad.... so i guess a normal setup LIM UIM and T-body would be 250 bucks, plus shipping...
300 if your sending us some hardpiping with the intake!!!!
300 if your sending us some hardpiping with the intake!!!!
Thread Starter
Locust of the apocalypse
Joined: Apr 2003
Posts: 2,553
Likes: 2
From: Directly above the center of the earth (York, PA)
OK, from the PM's we've decided that some of you'se guys are a little leary after seeing some of the screwed up work out there, so we've decided that we'll do a few at 75 bucks per piece, and 25 for the throttle body, so if'n yer interested, give us a holler.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
