check engine light -- changing plugs?
check engine light -- changing plugs?
We have an intermittent Check Engine Light, I'll pull the codes tonight -- but it all started when we changed the plugs a couple of weeks ago. Just wondering if there is any common mishap that could have started the Codes?
I'm sure we knocked around the knock sensor and ground wires some because we had to get out plugs that were set too deep (the ground down socket trick).
First sign was no odomoter and CEL right after the plug install.
Reset with the negative battery ground and the odometer came back and the CEL light went out.
now, a week or so later the CEL has intermittently come on and gone off.
Today, my son called to say that it stayed on. We'll pull the codes tonight, but any thoughts?
Thanks as always
I'm sure we knocked around the knock sensor and ground wires some because we had to get out plugs that were set too deep (the ground down socket trick).
First sign was no odomoter and CEL right after the plug install.
Reset with the negative battery ground and the odometer came back and the CEL light went out.
now, a week or so later the CEL has intermittently come on and gone off.
Today, my son called to say that it stayed on. We'll pull the codes tonight, but any thoughts?
Thanks as always
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
befarrer
Microtech
3
Aug 22, 2015 05:52 PM
ncds_fc
New Member RX-7 Technical
1
Aug 15, 2015 10:06 AM



