Changing the cartrige on the twins
04-16-05, 01:34 PM
#2
Senior Member
Join Date: May 2001
Location: Seattle
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
http://robrobinette.com/turbo.htm
Don't impale yourself with the snap ring, it has a lot of tension behind it. have fun.
I assumed you had the turbo's already out, if not the site there should help. I'd also recommend replacing the other cartridge sinse you are there. Why change one dirty sock?
Don't impale yourself with the snap ring, it has a lot of tension behind it. have fun.
I assumed you had the turbo's already out, if not the site there should help. I'd also recommend replacing the other cartridge sinse you are there. Why change one dirty sock?
Last edited by rotorhead333; 04-16-05 at 01:38 PM.
04-16-05, 08:10 PM
#3
apex seal BBQ
Join Date: Sep 2002
Location: AL
Posts: 867
Likes: 0
Received 0 Likes
on
0 Posts
On the snap ring, your best bet is to get a set of long angle needle nose pliers and make a set of snap ring pliers. I've never had any luck with snap ring pliers working on turbo snap rings.
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM