CEL : Code 13, intake pres. sensor??
02-09-05, 09:31 PM
#2
GearHeadMoFo
iTrader: (1)
Join Date: Mar 2004
Location: ATL, GA
Posts: 467
Likes: 0
Received 0 Likes
on
0 Posts
I would check to see if it is unplugged before you go out and buy another one. They are exspensive.
Sometimes the hose will pop off, between the manifold or the sensor, under boost.
It is located just to the left of the brake booster if you are looking under the hood at the firewall. It is a little square box (approx 1"x1.5") with a vacumm hose coming out of the bottom. It also has an electrical connector on it.
Sometimes the hose will pop off, between the manifold or the sensor, under boost.
It is located just to the left of the brake booster if you are looking under the hood at the firewall. It is a little square box (approx 1"x1.5") with a vacumm hose coming out of the bottom. It also has an electrical connector on it.
02-09-05, 09:45 PM
#3
That is the boost sensor.
The car isn't idleing like crap at all. I don't think that is the same sensor because I have had that one off before and the car barely ran and backfired like crazy. Those are not the symptoms...today anyway (right).
Raj
The car isn't idleing like crap at all. I don't think that is the same sensor because I have had that one off before and the car barely ran and backfired like crazy. Those are not the symptoms...today anyway (right).
Raj
Thread
Thread Starter
Forum
Replies
Last Post