can you port the stock wastegate
#2
Original Gangster/Rotary!
iTrader: (213)
yes, it's possible. If you can't do it yourself, you can always send your turbos out to Bryan at www.BNRsupercars.com
#3
Rotary Enthusiast
iTrader: (5)
Join Date: Apr 2006
Location: pennsylvania
Posts: 1,488
Likes: 0
Received 0 Likes
on
0 Posts
i was told by someone very rotor knowledgable (sp) that porting the wastegate wont help with boost creep/spike when changine from cats to mid pipe. any insight? this was someone who i offered to pay to do it while my motor was apart....
#4
Banned. I got OWNED!!!
Join Date: Jul 2004
Location: next to the polishing wheel!!!
Posts: 1,179
Likes: 0
Received 1 Like
on
1 Post
If you have an open exhaust system then port the hole bigger and put in a bigger door .Mine is open to 1.380 with a bigger door . The prespool door is 1/10 inch bigger than the wastegate door .I have made doors bigger than those for the rich man non seq mod .
#5
Banned. I got OWNED!!!
Join Date: Jul 2004
Location: next to the polishing wheel!!!
Posts: 1,179
Likes: 0
Received 1 Like
on
1 Post
By the way my car has no cats with the BNR stage 3 supersized , the only set, 16lbs and the rich man mod .No creep ,so I say it works and none of my customers have complained about creep after porting with a bigger door .
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM