Build up - My 500+ WHP Single Turbo Build-Up Thread
#76
FD Under Construction =P
iTrader: (5)
Originally Posted by charlies7
i know where your **** is hiding
you know where his **** is hiding..
you planning on removing his **** from his hiding place... thats gross dude... everyone knows **** hides in the ***... you want to get it... don't you... *** pirate.
#79
Nearing Completion...
iTrader: (473)
Join Date: Aug 2006
Location: Chicago
Posts: 4,735
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dhahlen
Well seeing that J-Rat made 490hp on an aggressive port with 25psi on a 62mm turbo, it can be done with the 500r granted the ports are large enough...
#80
Nearing Completion...
iTrader: (473)
Join Date: Aug 2006
Location: Chicago
Posts: 4,735
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dhahlen
That proves it right there...
you know where his **** is hiding..
you planning on removing his **** from his hiding place... thats gross dude... everyone knows **** hides in the ***... you want to get it... don't you... *** pirate.
you know where his **** is hiding..
you planning on removing his **** from his hiding place... thats gross dude... everyone knows **** hides in the ***... you want to get it... don't you... *** pirate.
#81
FD Under Construction =P
iTrader: (5)
Yeah, the wait is just stupid. I don't see how it takes so long to pump those out. Then again.. I don't manufacture turbos, so I really have no clue. I'd like to see some 23+ psi pulls on it myself. That that it matters to me anyway, having two FD's - one with monster power, other with quick response... eh. I don't need a midrange, haha.
#82
3rd rotors a charm
iTrader: (4)
Originally Posted by dhahlen
That proves it right there...
you know where his **** is hiding..
you planning on removing his **** from his hiding place... thats gross dude... everyone knows **** hides in the ***... you want to get it... don't you... *** pirate.
you know where his **** is hiding..
you planning on removing his **** from his hiding place... thats gross dude... everyone knows **** hides in the ***... you want to get it... don't you... *** pirate.
#85
FD Under Construction =P
iTrader: (5)
Originally Posted by BLitzed33
should be able to make those numbers I think with a 62mm wheel. I have a 61.5mm wheel and with 25 lbs boost and just regular street ports made 544 whp/420lb ft torque.
#87
Originally Posted by dhahlen
What the ****? I'd like to see this dynograph. Not that I doubt you 100%, but seriously...
there ya go
#89
Original Gangster/Rotary!
iTrader: (213)
Originally Posted by BLitzed33
should be able to make those numbers I think with a 62mm wheel. I have a 61.5mm wheel and with 25 lbs boost and just regular street ports made 544 whp/420lb ft torque.
#91
Originally Posted by GoodfellaFD3S
Yeah, but you have a serious hotside on that turbo. You can't compare the R85 to the 3040..........
61.5 comp wheel
74 mm exhaust wheel
1.15 a/r
#93
Originally Posted by GoodfellaFD3S
I think you posted the wrong link
here ya go
https://www.rx7club.com/showthread.p...cars+makes+544
#95
Originally Posted by dhahlen
That's nice... what EMS?
I wonder why J-Rat was blowing hotair after 25psi... hrmm, he had journal bearing turbo as well.
I wonder why J-Rat was blowing hotair after 25psi... hrmm, he had journal bearing turbo as well.
This turbo spools pretty nice, now I see around 27 lbs at 4500 rpms full boost, ray made improvements in tuning and it spools faster now. it ran out of breath at 27-28 lbs and wouldnt sustain any higher boost levels past that, it would spike but then bleed down to 27-28, even with a ebc and mbc on atthe same time with a 22 lbs wg spring...Right now its detuned for CAM2 race gas as its less than half that of C16, Its tuned for 20lbs boost and made 495 whp...at 27 it made 561/445 lb ft
#96
FD Under Construction =P
iTrader: (5)
Originally Posted by BLitzed33
Electromotive TEC3R
This turbo spools pretty nice, now I see around 27 lbs at 4500 rpms full boost, ray made improvements in tuning and it spools faster now. it ran out of breath at 27-28 lbs and wouldnt sustain any higher boost levels past that, it would spike but then bleed down to 27-28, even with a ebc and mbc on atthe same time with a 22 lbs wg spring...Right now its detuned for CAM2 race gas as its less than half that of C16, Its tuned for 20lbs boost and made 495 whp...at 27 it made 561/445 lb ft
This turbo spools pretty nice, now I see around 27 lbs at 4500 rpms full boost, ray made improvements in tuning and it spools faster now. it ran out of breath at 27-28 lbs and wouldnt sustain any higher boost levels past that, it would spike but then bleed down to 27-28, even with a ebc and mbc on atthe same time with a 22 lbs wg spring...Right now its detuned for CAM2 race gas as its less than half that of C16, Its tuned for 20lbs boost and made 495 whp...at 27 it made 561/445 lb ft
#97
Originally Posted by dhahlen
Good EMS, J-Rat was running an e6k...
#99
Original Gangster/Rotary!
iTrader: (213)
Originally Posted by dhahlen
Wasn't...
I was comparting R85 to 61mm
I was comparting R85 to 61mm
Buuut----the problem with the 30/40 isn't the 35R compressor wheel----it's the small-*** turbine. 60mm compared to blitzed33's 74mm.