catch-22

iTrader: (2)

will a rb duel with a full exhaust and some restrictor plates be enough to keep the creep down to a reasonable level?

Mahjik

iTrader: (1)

Unfortunately there is no "one" direct solution for everyone. However, using restrictor plates has helped a lot of people. What size plate you need to use, you'll just have to experiment there.

turb0x2

iTrader: (71)

I run the rb duals with my t/78 setup and I have little to no issues with creep...

matty

i run rb duals with mp and have no boost issues as well. i am running stock twins.
it generally comes down to luck i guess.

Mahjik

iTrader: (1)

You also don't have the tiny stock wastegate.

catch-22

iTrader: (2)

thnks guys i try some stuff out

G's 3rd Gen

iTrader: (11)

Your question is a bit broad. What set-up are you running? What psi are you trying o hold?.. If stock turbos porting the wastegate hole and a elec. boost controller should keep it in check. At most it might be slight. You may need a restrictor plate. I am holding 16 psi solid w/ the above mentioned. No plate. G

catch-22

iTrader: (2)

really didnt want to port the wastegate. but if i do how hard is it to do? or should i take it some where? or would restrictor plates be enough wothout porting the wastegate. want to keep it at about 12 to 13. plan on getting a PFC also.

Narfle

iTrader: (16)

You may be fine with just the RB duals. You will most certainly be fine with the plates regardless of your catback. Jyro made my plates and they worked like a charm.

catch-22

iTrader: (2)

how many plates should i use and where

Cgotto6

iTrader: (8)

Why would you need more than one? Your just trying to put a restriction on the exhaust...

catch-22

iTrader: (2)

k didnt know if u put more it would help

Narfle

iTrader: (16)

just one