tiger18

iTrader: (1)

Right im about to install bosch 2200cc injectors in a secondary rail keeping standard primarys. After this the car will be drove 1 hour to tunner. My power fc is set up for the stock 850cc.
I spoke to tunner he said if i keep light throttle low boost the secondary injectors wont come online and the car will drive fine,, firstly is this true? and secondary can i alter a setting in the power fc to have the car run ok light driving to the mapper?
There must be a basic setting someone can give me to have the car run okish to get to tunner.

ZE Power MX6

iTrader: (157)

I did that when I had my car tune, drove to the dyno about 45mins away on stock primary and 2200 secondary, just stay out of boost and you’ll be fine.

DaleClark

iTrader: (55)

Yep. I don't think you can set those up with just a Commander. Just drive nice and easy. If you do get into boost you will know it, it will bog down like crazy.

Dale

tiger18

iTrader: (1)

ok,, thats perfect just wanted to confirm,, so just stay out of boost. many thanks again guys,, still playing with rx7 15 years on.