Bosch 2200cc injector power fc help
 

Right im about to install bosch 2200cc injectors in a secondary rail keeping standard primarys. After this the car will be drove 1 hour to tunner. My power fc is set up for the stock 850cc.
I spoke to tunner he said if i keep light throttle low boost the secondary injectors wont come online and the car will drive fine,, firstly is this true? and secondary can i alter a setting in the power fc to have the car run ok light driving to the mapper?
There must be a basic setting someone can give me to have the car run okish to get to tunner.

I did that when I had my car tune, drove to the dyno about 45mins away on stock primary and 2200 secondary, just stay out of boost and you’ll be fine.

Yep. I don't think you can set those up with just a Commander. Just drive nice and easy. If you do get into boost you will know it, it will bog down like crazy.

Dale

ok,, thats perfect just wanted to confirm,, so just stay out of boost. many thanks again guys,, still playing with rx7 15 years on.