3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Boost Swing need Help..

Thread Tools
 
Search this Thread
 
Old 07-14-11, 10:14 AM
  #1  
Junior Member
Thread Starter
 
tbase's Avatar
 
Join Date: Jun 2011
Location: Bangkok
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Boost Swing need Help..

I have a boost problem after doing V-Mount intercooler and Power FC installation.

The situation is the boost dropped too much while its transfer from primary to secondary turbo. Its dropped to only 0.3 or 0.2 Kg sometimes which is take way too long to pick up to maximum boost I set at 0.9 Kg. So when I drive on lower gear, the rev is over before the boost can pick up which is very annoying.

On the 4th and 5th gear, when the boost reach the maximum its swing up and down between 0.7 - 0.9 Kg, never stable.

I checked the vacuum are all fine as it can keep the air after many hours from engine shut.


Thank you in advance for advise.
Old 07-14-11, 10:30 AM
  #2  
Rotary Enthusiast

iTrader: (28)
 
zeroG's Avatar
 
Join Date: Aug 2008
Location: Miami, FL
Posts: 1,149
Likes: 0
Received 0 Likes on 0 Posts
http://www.autosportracetech.com/RX-...leshooting.htm
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Shainiac
Single Turbo RX-7's
12
07-17-19 02:20 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
Bauer778
3rd Generation Specific (1993-2002)
10
11-04-15 04:42 PM
zxrazorxz
3rd Generation Specific (1993-2002)
2
09-14-15 07:21 PM
High_Carb_Diet
Power FC Forum
1
09-05-15 09:07 AM



Quick Reply: Boost Swing need Help..



All times are GMT -5. The time now is 02:32 PM.