boost leak fixed, but cant boost over .72
Thread Starter
Rotary Enthusiast
Joined: Mar 2002
Posts: 1,430
Likes: 0
From: Tuscaloosa, AL
boost leak fixed, but cant boost over .72
I fixed my boost leak yesterday and I got curious becuase Im set on the pfc to run .80 but car want boost over .72 and if I set it on .90 it want boost over .78..My mods are dp, mp cb, is that the reason it want boost a full .80 or .90???? could it possibly be filed plugs???
Full Member
Joined: Mar 2001
Posts: 242
Likes: 0
From: Riverside/Sacramento
From my experience, the PFC didn't control boost that accurately. I had the same problem with the same exact mods, plus intake. Do you have an intake, if not, that is one mod where you gain the most power. I did spike to .9 sometimes setting the boost up to .95 the PFC.
Also, are you reading the boost levels from the boost gauge or the PFC? There is a discrepency between the two. The PFC seems to show a lower values versus a boost gauge.
Also, are you reading the boost levels from the boost gauge or the PFC? There is a discrepency between the two. The PFC seems to show a lower values versus a boost gauge.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM