boost controller and BOV
#1
Junior Member
Thread Starter
Join Date: Sep 2005
Location: Jacksonville
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
boost controller and BOV
Im looking to get a boost controller and a blow-off valve. Any good suggestions. and for twin turbos do u need two BOV or just one?
#2
Rotary Freak
iTrader: (8)
Originally Posted by Ruhter1408
Im looking to get a boost controller and a blow-off valve. Any good suggestions. and for twin turbos do u need two BOV or just one?
Or you could just run the stock "bov's" cause they are plenty good.
As far as boost controller, profec B.
#3
Rotary Enthusiast
iTrader: (14)
I agree buy a good electronic boost controller. As far as bov there is only one on the primary so if you wish you may replace that one, but the one on the secondary should not be removed if you are still running the twins in seq. mode. Also if you dont have any hard piping to weld a bov bung to it just looks tacky, but thats just my 2 cents.
#5
Junior Member
Thread Starter
Join Date: Sep 2005
Location: Jacksonville
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
im currently debating between the profec B and profec type-s. i see that you have alredy recomended the profec B but do you have any info on the type s?
#6
Moderator
iTrader: (7)
I don't recommend an electronic boost controller unless you expect to need that kind of adjustability in the future. It's fine to start with a manual boost controller for much less money.
Skip the BOV. Just unplug the stock one from the airbox if you need noise to impress the girls.
Dave
Skip the BOV. Just unplug the stock one from the airbox if you need noise to impress the girls.
Dave