raphbo

Hey is this the location you would put the boost controller in if you have a non-sequential setup? also what other things do you need to do to get the boost to be controlled from there?

Thanks,
Raphael

911GT2

Check out the third gen FAQ: https://www.rx7club.com/3rd-generation-specific-1993-2002-16/faq-3rd-gen-other-useful-links-68640/

Specifically the section on the non-seq setup:http://www.fd3s.net/non-sequential.html

raphbo

I installed the boost controller as in the photo, do I need to open the boost controller before I start the engine? What else do I need to do? I capped off the bottom of the wastegate actuator valve. I started it while it was shut as such and it sounded really bad, I think something must be wrong, not sure what it is. any help would be really great.

Thanks,
Raph

FD3S2005

iTrader: (11)

i would suggest getting an electric boost controller.. alot easyer to work with imo

raphbo

Sure if I had one, I am just asking about in my current setup with the manual boost T do I need to keep it open while the car is first started up? if so how many revolutions do I turn it?