Whats the bolt ID (diameter) of the trailing arms and toe links at the chassis and the hub?

Also anyone know if the diameters of a bolt are the same for a given head size?

 

I'm pretty sure it's 14 mm.

 

The trailing arms have a 17mm nut and bolt at the front and a 14mm bolt at the back (through the lower control arm). The toe links have a 14mm nut and bolt at each end.

If you're looking for the diameters of the shafts of the bolts, the 14mm bolts have a 10mm shaft and the 17mm bolts have a 12mm shaft.

 

Hmmm, I thought one had a 19mm head, do you know what that translates to?

Thanks for the help though! Now gotta find the bolts!

 

Multiply the MM size by .03937

 

Nope.

Or divide by 25.4.

 

Wait, why am I multpling and dividing to get standard sizes?

 

That's what I was wondering.

Using SAE bolts in place of metric ones is not sensible.

 

Because you didn't specify what you were looking for or why.

 

I appreciate the help! All I needed were th bolt sizes

TA 17mm head with 12mm shaft and 14mm head with 10mm shaft
Toe 14mm head with 10mm shaft on both