3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Bogging issues

Thread Tools
 
Search this Thread
 
Old Oct 5, 2007 | 08:50 PM
  #1  
Dregsati's Avatar
Thread Starter
Full Member
Tenured Member 15 Years
iTrader: (1)
 
Joined: Dec 2005
Posts: 75
Likes: 1
From: Bellevue, Washington
Bogging issues

I recently installed a manual boost controller for the time being, but whenever i raise the boost the car begins to bog at high rpms- normally around 6k rpm. The higher i raise the boost the lower in the rpm ban the bogging begins. I have been searching the forum, but haven't been to find something that will help find the problem. Any help would be apreciated, thanks.
Reply
Old Oct 5, 2007 | 08:59 PM
  #2  
crcleofdst's Avatar
Huh?
Tenured Member 15 Years
 
Joined: Jul 2004
Posts: 670
Likes: 0
From: Baltimore, Maryland
What are your mods?
Reply
Old Oct 5, 2007 | 09:55 PM
  #3  
rotorsownu's Avatar
HAHA V8
 
Joined: Jan 2007
Posts: 355
Likes: 0
From: Virginia
Originally Posted by Dregsati
I recently installed a manual boost controller for the time being, but whenever i raise the boost the car begins to bog at high rpms- normally around 6k rpm. The higher i raise the boost the lower in the rpm ban the bogging begins. I have been searching the forum, but haven't been to find something that will help find the problem. Any help would be apreciated, thanks.
If you're running stock twins with the wastegate not ported, and running a DP, MP, and catback, you're probably having boost spike.
Reply
Old Oct 6, 2007 | 12:59 AM
  #4  
Dregsati's Avatar
Thread Starter
Full Member
Tenured Member 15 Years
iTrader: (1)
 
Joined: Dec 2005
Posts: 75
Likes: 1
From: Bellevue, Washington
I have the following mods- down pipe, cat back, still have the stock main cat, FMIC, RE intake, HKS BOV, and an RE- amimya b-type ecu that is tuned to handle the increased boost up to 1.1 bar. I'm not getting boost, i have been watching for that. I did at first, but that was fixed after i put in the RE tuned ecu.
thanks
Reply
Old Oct 7, 2007 | 04:42 PM
  #5  
Dregsati's Avatar
Thread Starter
Full Member
Tenured Member 15 Years
iTrader: (1)
 
Joined: Dec 2005
Posts: 75
Likes: 1
From: Bellevue, Washington
Does anyone have any ideas?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
Bauer778
3rd Generation Specific (1993-2002)
10
Nov 4, 2015 04:42 PM
heywier427
Naturally Aspirated Performance Forum
2
Sep 11, 2015 04:49 PM
Steven_McKinley
General Rotary Tech Support
12
Sep 5, 2015 10:48 AM




All times are GMT -5. The time now is 07:55 AM.