Bnr stage 3 turbos and idemitsu premix
Bnr stage 3 turbos and idemitsu premix
Does anyone here use premix with their BNR stage 3 turbos? cause i remember that, BNR turbos can't not use synthetic. and the idemitsu premix ( also know as synthetic blending ), so my question is:
Does anyone with BNR stage 3 here do the premix...?? please share!!
Does anyone with BNR stage 3 here do the premix...?? please share!!
Premix will be fine that is different from the oil in the oil pan. Do you mean premixing so you can run synthetic in the pan? I am not sure but I believe there are optional seals if you are going to run synthetic oil in the oil pan. If you are just asking if they will be ok to use premix in the gas tank the answer is yes. Hope this helps.
-Chance
-Chance
ok.. BNR CAN"T use full synthetic oil. unless you ask Bryan, to change some internal parts inside the turbos..then you can run full synthetic.
and i just talked with Bryan.
he said: we can use premix with the BNR turbos, it will not hurt or do any damage to the BNR turbos.
Joined: May 2005
Posts: 3,243
Likes: 42
From: Kennewick, Washington
BNR's can be ran with either synthetic, or non synthetic. You have to specify which seal you want when your order them. Carbon seals are made to be ran with non synthetic, dynamic seals (according to Bryan at BNR) are made to be ran with synthetic.
Talk to Bryan first, then order your BNR's. He will build them to whichever spec you wish. I personally feel the best combination is dynamic seals ran with synthetic with the RA adapter to feed the OMP with 2 stroke for the oil injectors.
Talk to Bryan first, then order your BNR's. He will build them to whichever spec you wish. I personally feel the best combination is dynamic seals ran with synthetic with the RA adapter to feed the OMP with 2 stroke for the oil injectors.
Trending Topics
Like Monkman said, Bryan can make your bnr's with either traditional seals (non-synthetic oil) or Dynamic seals (Synthetic oil).
Pre-mix goes in the fuel tank, and has no relation to the oil which is helping to cool the turbos
Pre-mix goes in the fuel tank, and has no relation to the oil which is helping to cool the turbos
Joined: Mar 2001
Posts: 30,804
Likes: 646
From: FL-->NJ/NYC again!
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
4
Jun 26, 2016 10:21 AM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM








