Blown engine diagnosis? Please help.
#1
Racerxrx7
Thread Starter
Join Date: Mar 2002
Location: Orlando, FL
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Blown engine diagnosis? Please help.
I recently my car started running like crap after a hard pull. I was having trouble with warm starts. I did a compression test after the car had been sitting for a week. Each chamber was showing about 65 psi. What should it be when the car is cold? The car iddles but wont really rev over 4 rpm. It breaks up around the same time. I thought it might be the coils or maybe the fuel pressure regulator, or injectors. Any ideas?
Thanks
I'm running a PFC. 3mm apex seals.
Thanks
I'm running a PFC. 3mm apex seals.
#3
I brake boost
Join Date: Aug 2003
Location: Orlando
Posts: 2,128
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by M104-AMG
Are all three compression pulses the same for each rotor ?
65psi seems low to me.
neil
65psi seems low to me.
neil
Thread
Thread Starter
Forum
Replies
Last Post
cdn
2nd Generation Specific (1986-1992)
14
09-10-15 06:23 AM
cdn
2nd Generation Non-Technical and pictures
0
08-11-15 08:59 PM