backfire issues
#1
Junior Member
Thread Starter
Join Date: Oct 2004
Location: japan
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
backfire issues
Hey,
I just installed a Blitz Nur Spec catback, and it keeps backfireing on decel. I know there are a lot of threads, but with different views. From what I get, it is normal and should not be a problem. My question is, is there a way to stop it? It did not happen before the new catback was installed.
I just installed a Blitz Nur Spec catback, and it keeps backfireing on decel. I know there are a lot of threads, but with different views. From what I get, it is normal and should not be a problem. My question is, is there a way to stop it? It did not happen before the new catback was installed.
#2
Rotary on a budget
iTrader: (1)
Join Date: Sep 2003
Location: Austin, Tx
Posts: 823
Likes: 0
Received 0 Likes
on
0 Posts
Im assuming you had the stock Cat-back on?
if so there really isent anything you can do about it if your running the stock ecu, you might check and make sure your exhaust is grounded correctly
if so there really isent anything you can do about it if your running the stock ecu, you might check and make sure your exhaust is grounded correctly
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Shainiac
Single Turbo RX-7's
12
07-17-19 02:20 PM