Auto to Manual Tranny swap?
#1
Full Member
Thread Starter
Join Date: Oct 2003
Location: toledo, ohio
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
Auto to Manual Tranny swap?
Is there an exact parts list out there? Also for someone like me with little experience is this a concievable task or is it something for the shop? What is a ballpark estimate for this swap? I know its supposedly a PITA and its just better to purchase a 5spd. However I can get a 93' with 100,000 on chassis and 40,000 on rebuilt engine/turbos for 7,000 so i think im getting a deal. Correct me if i'm wrong.\
Thanks
Thanks
#6
Rotary Enthusiast
Join Date: Jun 2003
Location: colorado
Posts: 1,400
Likes: 0
Received 0 Likes
on
0 Posts
call rx7store.net
they quoted me 1,000 for the labor. you have to source out your own parts.
Jason also said that you dont need a wiring harness since they splice everything toghether for you.
If you want to go with a cost effwective setup for now.I would suggest a exedy clutch,resurface the flywheel,new master cylinders , recycled tranny and differential.
they quoted me 1,000 for the labor. you have to source out your own parts.
Jason also said that you dont need a wiring harness since they splice everything toghether for you.
If you want to go with a cost effwective setup for now.I would suggest a exedy clutch,resurface the flywheel,new master cylinders , recycled tranny and differential.
Thread
Thread Starter
Forum
Replies
Last Post
sleepydogz
Old School and Other Rotary
8
10-04-15 03:46 PM
djritz
3rd Generation Specific (1993-2002)
2
08-25-15 02:46 PM
maikelc
3rd Generation Specific (1993-2002)
8
08-24-15 11:04 AM