Auto to manual Swap Wiring
04-26-04, 10:22 PM
#1
Full Member
Thread Starter
Join Date: Jan 2004
Location: Florida
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Auto to manual Swap Wiring
All I have left to do on the swap is the electrical crap. I have a manual computer and a auto harness. Can all the wires that need connecting be found in the wires going to the Auto transmission under the car? What do I need to cut or connect. to get power and hook up the 1-2 switch, reverse switch, and neutral switch? Any help wound be much appreciated.
04-26-04, 10:31 PM
#3
Full Member
Thread Starter
Join Date: Jan 2004
Location: Florida
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Got that already, Dont have a manual harness. using the automatic one. As far as the connections and wires it gives, those are probly located at the ecu, correct? Do i have to run them from the ecu down to the transmission? Or can i find them in the old harnesses that went to the auto tranny?
Last edited by GSXR0383; 04-26-04 at 10:45 PM.
Thread
Thread Starter
Forum
Replies
Last Post
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 07:50 PM
maikelc
3rd Generation Specific (1993-2002)
8
08-24-15 11:04 AM